Electric Gate Installation

Nationwide · England, Scotland & Wales

Electric Gate Installation across the UK

Safe, reliable electric gates fitted by vetted local installers.

In short

Electric Gate Installation is the supply and fitting of powered driveway or entrance gates, including the gate leaves, posts, motors or sliding operators, control board, safety devices and access control. A compliant install is risk-assessed, fitted with force limiting and safety edges or photocells, wired to BS 7671 and handed over with a technical file.

  • Free, no-obligation quotes
  • Vetted, insured specialists
  • Clear fixed prices

Free Electric Gate Installation quote

No obligation. We only use your details to reply about this job.

Fixed, clear prices

One all-in price before any work starts.

Vetted specialists

Insured teams who do this work every week.

Responsible disposal

Licensed waste routes and proper paperwork.

500 areas covered

Pages for every town we serve.

An electric gate is a machine, not just a fence panel with a motor bolted on. It has to open and close thousands of times a year, stop instantly if a child or car is in the way, and keep working through frost, rain and power cuts. We arrange electric gate installation through a network of vetted, insured local installers who survey the site, design the right system and commission it properly.

Most of the work is in the details you never see: the concrete footing for the hinge posts, the ducting for low-voltage cables, the gradient of the drive and the force settings on the motor. Tell us about your entrance through the quote form and we will match you with an installer who can price the whole job, from groundworks to the intercom, in one clear figure.

How it works

  1. Tell us about the entrance

    Use the quote form to describe the opening width, drive slope, existing gates or posts, and whether you want swing or sliding. Photos of both sides of the entrance help an installer price accurately before visiting.

  2. Site survey

    A local installer measures the opening, checks gradients and ground conditions, finds the nearest power supply and talks through gate style, motor type and access control options. They also note any hazards such as a public footpath alongside.

  3. Fixed written quote

    You receive one clear price covering the gates, posts, motors, groundworks, ducting, safety devices and commissioning. The quote states lead times for made-to-measure gates, which are often three to six weeks.

  4. Groundworks and installation

    Footings, ducts and tracks go in first and are left to cure. The gates are hung, motors and control board fitted, and safety devices wired. Most domestic jobs need two to four days on site in total.

  5. Commissioning and handover

    The installer sets the travel limits, tests force against an obstruction, checks every safety device and shows you how to use the manual release. You get the technical file, user guide and remote fobs.

Electric Gate Installation prices

Electric gate prices depend on three things: the gates themselves, the automation and the groundworks. A pair of standard steel gates with ram motors on existing posts costs far less than bespoke hardwood gates on new brick piers with underground motors and a video intercom. The figures below are guide prices for typical UK homes in 2026 and include fitting.

JobGuide priceNotes
Automation kit fitted to existing double swing gates£1,800–£3,200Ram motors, control board, photocells, warning light and two fobs, assuming the gates and posts are sound.
Steel double swing gates with automation£4,500–£8,500Made-to-measure metal gates up to about 4m wide, new steel posts, motors and basic safety kit.
Hardwood double swing gates with automation£6,000–£11,000Iroko or oak gates on steel frames, which add weight and need stronger motors and posts.
Sliding gate with track or cantilever system£6,500–£13,000Includes concrete base or track, rack and motor; cantilever designs sit at the upper end.
Underground motors instead of ramsfrom £1,200Extra cost per pair for foundation boxes, drainage and the motors themselves.
Video intercom or GSM access control£450–£1,500Wired or app-based video intercoms and GSM units, including cabling to the house.

What affects the price →

Who we work for

Homeowners

Families who want a secure drive, a safe place for children and pets to play, and the convenience of opening the gate from the car in the rain. Most domestic jobs are double swing or single sliding gates.

Landlords and HMO owners

Landlords with shared driveways who need gates that are documented, serviced and safe for tenants. A written risk assessment and service history help protect them if something goes wrong.

Residential management companies

Managing agents looking after apartment blocks and gated developments where gates cycle many times a day and need heavy-duty operators, robust access control and planned maintenance visits.

Farms and rural properties

Rural homes and smallholdings with long drives and wide openings, often far from the house, where solar-powered operators or GSM control avoid long cable runs.

Businesses and yards

Commercial premises, builders' yards and car parks needing sliding gates for vehicles, timed opening, fob management for staff and secure overnight closing.

Rules and standards that apply

  • Powered gates are treated as machinery, and new installations should be built and commissioned in line with the Supply of Machinery (Safety) Regulations 2008, including a risk assessment, technical file and declaration of conformity.
  • BS EN 12453 sets out safety requirements for power-operated gates, including force limits and protection against crushing, shearing and impact.
  • Electrical work for gate motors and control panels should meet BS 7671, and in England new outdoor circuits fall under Part P of the Building Regulations.
  • Under the Highways Act 1980, gates must not open outwards over a public road or footpath.
  • In England, permitted development generally allows gates up to 1 metre high next to a road used by vehicles and 2 metres elsewhere; taller gates, listed buildings and conservation areas may need planning permission.

How to choose the right electric gate installation company

  • Ask whether the installer carries out a written risk assessment and force test on every gate they commission.
  • Check that they hand over a technical file, user instructions and a declaration of conformity at the end.
  • Look for installers who have completed recognised gate safety training, such as courses run by the Door and Hardware Federation.
  • Confirm they hold public liability insurance and use a qualified electrician for the mains supply.
  • Ask which motor brands they fit and whether spare parts and boards are readily available in the UK.
  • Make sure the quote spells out groundworks, ducting, safety devices and making good, not just the gates and motors.

Frequently asked questions

How much does electric gate installation cost in the UK?

Most homeowners pay between £4,500 and £11,000 for new automated double gates fitted. Automating existing sound gates costs roughly £1,800 to £3,200. Sliding gates usually cost £6,500 to £13,000 because of the extra groundworks. Bespoke hardwood, underground motors, long cable runs and video intercoms all push the price up.

Do I need planning permission for electric gates?

Often not. In England, gates up to 1 metre high next to a road used by vehicles, or 2 metres elsewhere, are usually permitted development. You will need permission for taller gates, for listed buildings and often in conservation areas. Creating a new vehicle access onto a classified road also needs consent. Check with your council if you are unsure.

Swing or sliding gates: which is better?

It depends on your drive. Swing gates are cheaper and suit level drives with space for the leaves to open inwards. Sliding gates suit sloping drives, short driveways and openings where a parked car would block a swinging leaf. Sliding gates need a clear run beside the entrance at least as long as the gate.

How long does it take to install electric gates?

On site, most domestic installations take two to four days, including time for concrete to cure. Before that, made-to-measure gates typically take three to six weeks to manufacture. Retrofitting motors to existing gates can often be done in one or two days if the posts and hinges are in good condition.

What happens to electric gates in a power cut?

Every compliant electric gate has a manual release, usually a key-operated lever on the motor, so you can open it by hand. Many systems can also be fitted with battery backup that keeps the gates working for a set number of cycles during an outage. Your installer should show you how to use the release at handover.

Are electric gates safe for children and pets?

They are when installed properly. A safe gate has force limiting, safety edges on the closing edges, photocells at more than one height and no exposed trapping points. Older gates with a single pair of photocells may not meet current expectations. A force test and risk assessment show whether your gate is safe.

Can my existing wooden gates be automated?

Often, yes, if the gates are solid, square and hung on sturdy posts. Rotten posts, sagging leaves or weak hinges need fixing first, because a motor will make any weakness worse. Heavy timber gates may need a steel frame on the back. An installer will inspect them before quoting for motors.

Do electric gates need servicing?

Yes. Most manufacturers and installers recommend a service at least once a year, and more often for shared or commercial gates. A service checks hinges, motors, safety devices, battery backup and closing force. Regular servicing catches faults early and gives you a record showing the gate has been looked after.

See all FAQs →

Get a free electric gate installation quote

Tell us what you need and we'll come back with a clear price.

Request a quote