Electric Gate Installation glossary
The terms you'll come across, explained in plain English.
- Articulated arm motor
- A swing gate operator with a folding arm, used where thick brick piers or wide posts make it hard to mount a ram motor at the correct angle.
- Cantilever sliding gate
- A sliding gate that hangs from rollers mounted beside the opening, so no track crosses the drive. It needs a longer frame to counterbalance the gate.
- Control board
- The electronic unit that runs the motors, reads signals from fobs, keypads and safety devices, and sets speed, force and timing. It sits in a weatherproof box near the gate.
- Declaration of conformity
- A document from the installer stating that the automated gate, as a machine, meets the relevant safety requirements. It is issued once the gate is commissioned.
- Exit loop
- A wire loop buried in the drive that detects a vehicle approaching from inside and opens the gate automatically, so drivers do not need a fob to leave.
- Force testing
- Measuring the force a closing gate exerts at set points using a calibrated force meter, to confirm it stays within the limits set out in BS EN 12453.
- GSM access control
- A unit with a SIM card that lets authorised phone numbers open the gate by calling it or using an app, useful for family, deliveries and visitors.
- Manual release
- A key-operated mechanism on the motor that disconnects the drive so the gate can be pushed open by hand during a power cut or fault.
- Photocells
- A pair of sensors that send an infrared beam across the gate opening. If something breaks the beam while the gate closes, the gate stops or reverses.
- Ram motor
- A gate operator that bolts between the post and the gate leaf and pushes it open with an extending arm. It is the most common and cost-effective motor for domestic swing gates.
- Rising butt hinge
- A hinge that lifts the gate as it opens, helping a swing gate clear a drive that rises behind the opening.
- Safety edge
- A pressure-sensitive rubber strip fitted to a gate's closing or leading edge. When it is pressed by a person or object, it signals the gate to reverse.
- Technical file
- The record of a powered gate installation, including the risk assessment, force test results, component details and maintenance log, kept with the declaration of conformity.
- Tracked sliding gate
- A sliding gate that runs on wheels along a rail set into a level concrete strip across the opening. The track must be kept clear of debris and ice.
- Underground motor
- A gate operator housed in a sealed foundation box beneath the hinge, so it is hidden from view. It needs a concrete surround and drainage to stop water sitting around the motor.
Get a free electric gate installation quote
Tell us what you need and we'll come back with a clear price.
Request a quote