Electric Gate Installation

Electric Gate Installation FAQs

Straight answers to the questions we're asked most.

How much does electric gate installation cost in the UK?

Most homeowners pay between £4,500 and £11,000 for new automated double gates fitted. Automating existing sound gates costs roughly £1,800 to £3,200. Sliding gates usually cost £6,500 to £13,000 because of the extra groundworks. Bespoke hardwood, underground motors, long cable runs and video intercoms all push the price up.

Do I need planning permission for electric gates?

Often not. In England, gates up to 1 metre high next to a road used by vehicles, or 2 metres elsewhere, are usually permitted development. You will need permission for taller gates, for listed buildings and often in conservation areas. Creating a new vehicle access onto a classified road also needs consent. Check with your council if you are unsure.

Swing or sliding gates: which is better?

It depends on your drive. Swing gates are cheaper and suit level drives with space for the leaves to open inwards. Sliding gates suit sloping drives, short driveways and openings where a parked car would block a swinging leaf. Sliding gates need a clear run beside the entrance at least as long as the gate.

How long does it take to install electric gates?

On site, most domestic installations take two to four days, including time for concrete to cure. Before that, made-to-measure gates typically take three to six weeks to manufacture. Retrofitting motors to existing gates can often be done in one or two days if the posts and hinges are in good condition.

What happens to electric gates in a power cut?

Every compliant electric gate has a manual release, usually a key-operated lever on the motor, so you can open it by hand. Many systems can also be fitted with battery backup that keeps the gates working for a set number of cycles during an outage. Your installer should show you how to use the release at handover.

Are electric gates safe for children and pets?

They are when installed properly. A safe gate has force limiting, safety edges on the closing edges, photocells at more than one height and no exposed trapping points. Older gates with a single pair of photocells may not meet current expectations. A force test and risk assessment show whether your gate is safe.

Can my existing wooden gates be automated?

Often, yes, if the gates are solid, square and hung on sturdy posts. Rotten posts, sagging leaves or weak hinges need fixing first, because a motor will make any weakness worse. Heavy timber gates may need a steel frame on the back. An installer will inspect them before quoting for motors.

Do electric gates need servicing?

Yes. Most manufacturers and installers recommend a service at least once a year, and more often for shared or commercial gates. A service checks hinges, motors, safety devices, battery backup and closing force. Regular servicing catches faults early and gives you a record showing the gate has been looked after.

Are underground gate motors worth the extra cost?

They are worth it if appearance matters most, because the motor is hidden beneath the hinge. They cost more, are harder to service and need good drainage, as standing water in the foundation box is a common cause of failure. Ram motors are cheaper, easier to maintain and suit most homes.

Can I open my electric gate from my phone?

Yes. Many control boards accept Wi-Fi or GSM modules that let you open the gate from an app or by calling it from an approved number. Video intercoms can show who is at the gate on your phone. Good signal at the gate is essential, so installers sometimes add an outdoor access point.

Do electric gates need a separate power supply?

Most mains-powered gates need a dedicated fused spur run in armoured cable from your consumer unit to the control box. This part should be done by a qualified electrician. Low-voltage motor and safety wiring then runs in ducting. Solar-powered kits are available for remote gates without mains power nearby.

Can electric gates open outwards onto the pavement?

No. Gates must not open outwards over a public road or footpath. If your drive is too short or steep for gates to open inwards, a sliding gate is the usual answer. An installer will check this at the survey and design the gate to open within your boundary.

Get a free electric gate installation quote

Tell us what you need and we'll come back with a clear price.

Request a quote