Electric Gate Installation
Sliding Gate Installation
Track or cantilever sliding gates for sloping drives, short driveways and entrances where there is no space for leaves to swing.

What's involved
A sliding gate runs sideways along the boundary, so it suits drives that slope up from the road or where a parked car would block a swinging leaf. You need a clear run beside the opening at least as long as the gate itself, plus about a third more for a cantilever design. Tracked gates roll on a steel rail set into a concrete strip across the entrance. Cantilever gates hang off rollers on a concrete base to one side, leaving the drive clear of rails, which is better for leaves, grit and snow. The operator is a geared motor driving a toothed rack fixed along the gate. Groundworks usually take a day or two, with the concrete left to cure before the motor goes in. Expect three to four days in total for a standard domestic sliding gate.
How we handle it
Tell us about the entrance
Use the quote form to describe the opening width, drive slope, existing gates or posts, and whether you want swing or sliding. Photos of both sides of the entrance help an installer price accurately before visiting.
Site survey
A local installer measures the opening, checks gradients and ground conditions, finds the nearest power supply and talks through gate style, motor type and access control options. They also note any hazards such as a public footpath alongside.
Fixed written quote
You receive one clear price covering the gates, posts, motors, groundworks, ducting, safety devices and commissioning. The quote states lead times for made-to-measure gates, which are often three to six weeks.
Groundworks and installation
Footings, ducts and tracks go in first and are left to cure. The gates are hung, motors and control board fitted, and safety devices wired. Most domestic jobs need two to four days on site in total.
Commissioning and handover
The installer sets the travel limits, tests force against an obstruction, checks every safety device and shows you how to use the manual release. You get the technical file, user guide and remote fobs.
Price guide
Electric gate prices depend on three things: the gates themselves, the automation and the groundworks. A pair of standard steel gates with ram motors on existing posts costs far less than bespoke hardwood gates on new brick piers with underground motors and a video intercom. The figures below are guide prices for typical UK homes in 2026 and include fitting.
- Steel double swing gates with automation: £4,500–£8,500. Made-to-measure metal gates up to about 4m wide, new steel posts, motors and basic safety kit.
- Automation kit fitted to existing double swing gates: £1,800–£3,200. Ram motors, control board, photocells, warning light and two fobs, assuming the gates and posts are sound.
- Video intercom or GSM access control: £450–£1,500. Wired or app-based video intercoms and GSM units, including cabling to the house.
Questions about sliding gate installation
How much does electric gate installation cost in the UK?
Most homeowners pay between £4,500 and £11,000 for new automated double gates fitted. Automating existing sound gates costs roughly £1,800 to £3,200. Sliding gates usually cost £6,500 to £13,000 because of the extra groundworks. Bespoke hardwood, underground motors, long cable runs and video intercoms all push the price up.
Swing or sliding gates: which is better?
It depends on your drive. Swing gates are cheaper and suit level drives with space for the leaves to open inwards. Sliding gates suit sloping drives, short driveways and openings where a parked car would block a swinging leaf. Sliding gates need a clear run beside the entrance at least as long as the gate.
Other services
Swing Gate Installation
Single or double swing gates on new or existing posts, with ram or underground motors sized to the gate weight, width and how exposed it is to wind.
Gate Automation Retrofit
Adding motors, a control board and safety devices to gates you already have, after checking the gates and posts are strong enough.
Access Control and Intercoms
Keypads, video intercoms, GSM and app control, ANPR cameras and exit loops so you decide who gets in and how.
Electric Gate Safety Upgrades
Bringing older automated gates up to current safety expectations with force testing, safety edges, extra photocells and a proper risk assessment.
Electric Gate Servicing and Repairs
Planned maintenance, fault finding and repairs for automated gates, including failed motors, burnt boards, broken hinges and misbehaving photocells.
Sliding Gate Installation near you
Get a free electric gate installation quote
Tell us what you need and we'll come back with a clear price.
Request a quote