Electric Gate Installation
Electric Gate Servicing and Repairs
Planned maintenance, fault finding and repairs for automated gates, including failed motors, burnt boards, broken hinges and misbehaving photocells.

What's involved
Electric gates need servicing at least once a year, and twice for busy shared entrances. A service covers checking hinges and rollers, lubricating moving parts, cleaning and aligning photocells, checking battery backup, testing manual release and repeating force measurements. Common faults include water in underground motor boxes, photocells knocked out of line by a car, worn gearboxes, insect nests in control boxes and boards damaged by lightning or power surges. Engineers carry common spare parts, so many repairs are done on the first visit. Where a manufacturer has stopped making a motor, they will advise whether a compatible board can be fitted or whether new operators make more sense. Keep any paperwork from the original install handy, as it speeds up diagnosis.
How we handle it
Tell us about the entrance
Use the quote form to describe the opening width, drive slope, existing gates or posts, and whether you want swing or sliding. Photos of both sides of the entrance help an installer price accurately before visiting.
Site survey
A local installer measures the opening, checks gradients and ground conditions, finds the nearest power supply and talks through gate style, motor type and access control options. They also note any hazards such as a public footpath alongside.
Fixed written quote
You receive one clear price covering the gates, posts, motors, groundworks, ducting, safety devices and commissioning. The quote states lead times for made-to-measure gates, which are often three to six weeks.
Groundworks and installation
Footings, ducts and tracks go in first and are left to cure. The gates are hung, motors and control board fitted, and safety devices wired. Most domestic jobs need two to four days on site in total.
Commissioning and handover
The installer sets the travel limits, tests force against an obstruction, checks every safety device and shows you how to use the manual release. You get the technical file, user guide and remote fobs.
Price guide
Electric gate prices depend on three things: the gates themselves, the automation and the groundworks. A pair of standard steel gates with ram motors on existing posts costs far less than bespoke hardwood gates on new brick piers with underground motors and a video intercom. The figures below are guide prices for typical UK homes in 2026 and include fitting.
- Hardwood double swing gates with automation: £6,000–£11,000. Iroko or oak gates on steel frames, which add weight and need stronger motors and posts.
- Steel double swing gates with automation: £4,500–£8,500. Made-to-measure metal gates up to about 4m wide, new steel posts, motors and basic safety kit.
- Automation kit fitted to existing double swing gates: £1,800–£3,200. Ram motors, control board, photocells, warning light and two fobs, assuming the gates and posts are sound.
Questions about electric gate servicing and repairs
How much does electric gate installation cost in the UK?
Most homeowners pay between £4,500 and £11,000 for new automated double gates fitted. Automating existing sound gates costs roughly £1,800 to £3,200. Sliding gates usually cost £6,500 to £13,000 because of the extra groundworks. Bespoke hardwood, underground motors, long cable runs and video intercoms all push the price up.
Do I need planning permission for electric gates?
Often not. In England, gates up to 1 metre high next to a road used by vehicles, or 2 metres elsewhere, are usually permitted development. You will need permission for taller gates, for listed buildings and often in conservation areas. Creating a new vehicle access onto a classified road also needs consent. Check with your council if you are unsure.
How long does it take to install electric gates?
On site, most domestic installations take two to four days, including time for concrete to cure. Before that, made-to-measure gates typically take three to six weeks to manufacture. Retrofitting motors to existing gates can often be done in one or two days if the posts and hinges are in good condition.
Other services
Swing Gate Installation
Single or double swing gates on new or existing posts, with ram or underground motors sized to the gate weight, width and how exposed it is to wind.
Sliding Gate Installation
Track or cantilever sliding gates for sloping drives, short driveways and entrances where there is no space for leaves to swing.
Gate Automation Retrofit
Adding motors, a control board and safety devices to gates you already have, after checking the gates and posts are strong enough.
Access Control and Intercoms
Keypads, video intercoms, GSM and app control, ANPR cameras and exit loops so you decide who gets in and how.
Electric Gate Safety Upgrades
Bringing older automated gates up to current safety expectations with force testing, safety edges, extra photocells and a proper risk assessment.
Electric Gate Servicing and Repairs near you
Get a free electric gate installation quote
Tell us what you need and we'll come back with a clear price.
Request a quote