Electric Gate Installation

Electric Gate Installation

Electric Gate Safety Upgrades

Bringing older automated gates up to current safety expectations with force testing, safety edges, extra photocells and a proper risk assessment.

Free Electric Gate Installation quote

No obligation. We only use your details to reply about this job.

Electric Gate Safety Upgrades — Electric Gate Installation

What's involved

Many electric gates fitted before modern standards were widely followed have no protection beyond a single pair of photocells. That leaves crushing and shearing points at the hinge, closing edge and between the gate and walls. A safety upgrade starts with a written risk assessment and a force test using a calibrated gauge to measure how hard the gate pushes when it meets an obstruction. Typical fixes include pressure-sensitive safety edges on the leading edge, extra photocells at different heights, closing the gap at the hinge side, reducing motor force and adding a flashing warning light. Where a control board cannot monitor safety devices, it is usually replaced. Most upgrades take a day. You receive updated documentation showing what was tested and changed, which landlords and managing agents often need.

How we handle it

  1. Tell us about the entrance

    Use the quote form to describe the opening width, drive slope, existing gates or posts, and whether you want swing or sliding. Photos of both sides of the entrance help an installer price accurately before visiting.

  2. Site survey

    A local installer measures the opening, checks gradients and ground conditions, finds the nearest power supply and talks through gate style, motor type and access control options. They also note any hazards such as a public footpath alongside.

  3. Fixed written quote

    You receive one clear price covering the gates, posts, motors, groundworks, ducting, safety devices and commissioning. The quote states lead times for made-to-measure gates, which are often three to six weeks.

  4. Groundworks and installation

    Footings, ducts and tracks go in first and are left to cure. The gates are hung, motors and control board fitted, and safety devices wired. Most domestic jobs need two to four days on site in total.

  5. Commissioning and handover

    The installer sets the travel limits, tests force against an obstruction, checks every safety device and shows you how to use the manual release. You get the technical file, user guide and remote fobs.

Price guide

Electric gate prices depend on three things: the gates themselves, the automation and the groundworks. A pair of standard steel gates with ram motors on existing posts costs far less than bespoke hardwood gates on new brick piers with underground motors and a video intercom. The figures below are guide prices for typical UK homes in 2026 and include fitting.

  • Automation kit fitted to existing double swing gates: £1,800–£3,200. Ram motors, control board, photocells, warning light and two fobs, assuming the gates and posts are sound.
  • Video intercom or GSM access control: £450–£1,500. Wired or app-based video intercoms and GSM units, including cabling to the house.
  • Underground motors instead of rams: from £1,200. Extra cost per pair for foundation boxes, drainage and the motors themselves.

Questions about electric gate safety upgrades

How much does electric gate installation cost in the UK?

Most homeowners pay between £4,500 and £11,000 for new automated double gates fitted. Automating existing sound gates costs roughly £1,800 to £3,200. Sliding gates usually cost £6,500 to £13,000 because of the extra groundworks. Bespoke hardwood, underground motors, long cable runs and video intercoms all push the price up.

Do I need planning permission for electric gates?

Often not. In England, gates up to 1 metre high next to a road used by vehicles, or 2 metres elsewhere, are usually permitted development. You will need permission for taller gates, for listed buildings and often in conservation areas. Creating a new vehicle access onto a classified road also needs consent. Check with your council if you are unsure.

How long does it take to install electric gates?

On site, most domestic installations take two to four days, including time for concrete to cure. Before that, made-to-measure gates typically take three to six weeks to manufacture. Retrofitting motors to existing gates can often be done in one or two days if the posts and hinges are in good condition.

Get a free electric gate installation quote

Tell us what you need and we'll come back with a clear price.

Request a quote