Electric Gate Installation

Electric Gate Installation

Gate Automation Retrofit

Adding motors, a control board and safety devices to gates you already have, after checking the gates and posts are strong enough.

Free Electric Gate Installation quote

No obligation. We only use your details to reply about this job.

Gate Automation Retrofit — Electric Gate Installation

What's involved

Plenty of solid timber and steel gates can be automated, but not every gate should be. The installer first checks the hinges, posts and frame for movement, rot or sag, because a motor will magnify any weakness and may fail within months. Timber gates often need a steel frame or extra bracing on the back. Heavy wooden gates over about 2.5 metres per leaf can need stronger rams or underground motors to cope with wind loading. The retrofit includes the motors, a control panel in a weatherproof housing, photocells, a warning light and remote fobs, plus a low-voltage cable run in ducting. Most retrofits take one to two days. You will need a nearby power supply, ideally a dedicated fused spur installed by an electrician, and access to both sides of the gate.

How we handle it

  1. Tell us about the entrance

    Use the quote form to describe the opening width, drive slope, existing gates or posts, and whether you want swing or sliding. Photos of both sides of the entrance help an installer price accurately before visiting.

  2. Site survey

    A local installer measures the opening, checks gradients and ground conditions, finds the nearest power supply and talks through gate style, motor type and access control options. They also note any hazards such as a public footpath alongside.

  3. Fixed written quote

    You receive one clear price covering the gates, posts, motors, groundworks, ducting, safety devices and commissioning. The quote states lead times for made-to-measure gates, which are often three to six weeks.

  4. Groundworks and installation

    Footings, ducts and tracks go in first and are left to cure. The gates are hung, motors and control board fitted, and safety devices wired. Most domestic jobs need two to four days on site in total.

  5. Commissioning and handover

    The installer sets the travel limits, tests force against an obstruction, checks every safety device and shows you how to use the manual release. You get the technical file, user guide and remote fobs.

Price guide

Electric gate prices depend on three things: the gates themselves, the automation and the groundworks. A pair of standard steel gates with ram motors on existing posts costs far less than bespoke hardwood gates on new brick piers with underground motors and a video intercom. The figures below are guide prices for typical UK homes in 2026 and include fitting.

  • Steel double swing gates with automation: £4,500–£8,500. Made-to-measure metal gates up to about 4m wide, new steel posts, motors and basic safety kit.
  • Automation kit fitted to existing double swing gates: £1,800–£3,200. Ram motors, control board, photocells, warning light and two fobs, assuming the gates and posts are sound.
  • Video intercom or GSM access control: £450–£1,500. Wired or app-based video intercoms and GSM units, including cabling to the house.

Questions about gate automation retrofit

Do I need planning permission for electric gates?

Often not. In England, gates up to 1 metre high next to a road used by vehicles, or 2 metres elsewhere, are usually permitted development. You will need permission for taller gates, for listed buildings and often in conservation areas. Creating a new vehicle access onto a classified road also needs consent. Check with your council if you are unsure.

Are underground gate motors worth the extra cost?

They are worth it if appearance matters most, because the motor is hidden beneath the hinge. They cost more, are harder to service and need good drainage, as standing water in the foundation box is a common cause of failure. Ram motors are cheaper, easier to maintain and suit most homes.

How long does it take to install electric gates?

On site, most domestic installations take two to four days, including time for concrete to cure. Before that, made-to-measure gates typically take three to six weeks to manufacture. Retrofitting motors to existing gates can often be done in one or two days if the posts and hinges are in good condition.

Get a free electric gate installation quote

Tell us what you need and we'll come back with a clear price.

Request a quote