Oldham · North West
Electric Gate Installation in Oldham
Planning electric gates for your home in Oldham? Our local installers also cover Chadderton, and can advise on planning limits set by Oldham.
Oldham and the surrounding area
We cover all of Oldham and the wider Oldham area. Postcodes we cover here include OL8, OL4, OL1, OL9, OL3 and M35. Nearby places we also cover include Lees, Mossley, Uppermill, Delph and Newhey.
Working in Oldham
Shared drives behind terraces and flats in Oldham need gates with clear access control for every household, often using keypads or app-based entry. In built-up parts of Oldham, cable routes can be tricky, so installers often run ducting under existing paving and make good afterwards.
The North West is one of the wetter regions of England, and its towns are built around dense Victorian terraces as well as large post-war and modern estates. On older homes in Oldham, the drive may be narrower than modern cars need, so installers measure carefully and may suggest a single sliding gate.
Our services in Oldham
Swing Gate Installation
Single or double swing gates on new or existing posts, with ram or underground motors sized to the gate weight, width and how exposed it is to wind.
Electric Gate Servicing and Repairs
Planned maintenance, fault finding and repairs for automated gates, including failed motors, burnt boards, broken hinges and misbehaving photocells.
Electric Gate Safety Upgrades
Bringing older automated gates up to current safety expectations with force testing, safety edges, extra photocells and a proper risk assessment.
Access Control and Intercoms
Keypads, video intercoms, GSM and app control, ANPR cameras and exit loops so you decide who gets in and how.
Gate Automation Retrofit
Adding motors, a control board and safety devices to gates you already have, after checking the gates and posts are strong enough.
Sliding Gate Installation
Track or cantilever sliding gates for sloping drives, short driveways and entrances where there is no space for leaves to swing.
Guide prices for Oldham
- Video intercom or GSM access control: £450–£1,500. Wired or app-based video intercoms and GSM units, including cabling to the house.
- Underground motors instead of rams: from £1,200. Extra cost per pair for foundation boxes, drainage and the motors themselves.
- Sliding gate with track or cantilever system: £6,500–£13,000. Includes concrete base or track, rack and motor; cantilever designs sit at the upper end.
Prices are a guide. Your quote for Oldham is a fixed price based on the details you give us. Full price guide.
Electric Gate Installation questions from Oldham
Do your installers cover areas near Oldham?
Yes. Our network covers Oldham and surrounding areas including Chadderton and Royton. Enter your postcode on the quote form and we will match you with an installer who regularly works in your area.
Can I get a sliding gate on a short drive in Oldham?
Yes, as long as there is a clear run beside the entrance roughly as long as the gate. Sliding gates are popular on short Oldham drives because they keep the space behind the gate free for parking.
Will electric gates in Oldham cope with winter weather?
Good-quality motors are rated for sub-zero temperatures. Installers serving Oldham also make sure underground motor boxes drain properly and tracks are kept clear, as ice and standing water cause most winter faults.
How soon can electric gates be fitted in Oldham?
Surveys in Oldham can usually be booked within a week or two. Made-to-measure gates take around three to six weeks to manufacture, then two to four days to install. Automation retrofits on existing gates can often be fitted sooner.
How long does it take to install electric gates?
On site, most domestic installations take two to four days, including time for concrete to cure. Before that, made-to-measure gates typically take three to six weeks to manufacture. Retrofitting motors to existing gates can often be done in one or two days if the posts and hinges are in good condition.
Do electric gates need a separate power supply?
Most mains-powered gates need a dedicated fused spur run in armoured cable from your consumer unit to the control box. This part should be done by a qualified electrician. Low-voltage motor and safety wiring then runs in ducting. Solar-powered kits are available for remote gates without mains power nearby.
Helpful guides
Sliding vs Swing Electric Gates: Which Is Right for Your Drive?
Choose swing gates if you have a level drive, enough space behind the gates for them to open, and want the lower cost. Choose a sliding…
Read the guide →How to Choose an Electric Gate Installer: Checks Before You Book
Choose an electric gate installer who carries out a site risk assessment, fits safety devices in line with BS EN 12453, force-tests the…
Read the guide →Get a free electric gate installation quote in Oldham
Tell us what you need and we'll come back with a clear price.
Request a quote