Guide · Homeowners · 3 min read · Updated 17 November 2026
How to Choose an Electric Gate Installer: Checks Before You Book
Short answer
Choose an electric gate installer who carries out a site risk assessment, fits safety devices in line with BS EN 12453, force-tests the gate at handover and provides a technical file and declaration of conformity. Check the electrical work will be certified to BS 7671, that they hold public liability insurance, and that the quote itemises gates, motors, safety kit, groundworks and making good.
Why the installer matters as much as the gates
Two installers can fit the same motors to the same gates and leave you with very different results. One will survey the site, check the posts, plan the cable route, assess every crush and shear point and commission the gate properly. The other will bolt on a kit, hand over the fobs and leave. Both gates open and close on day one; only one is safe and built to last.
Because the difference is not obvious from the driveway, the questions you ask before booking are your best protection.
Questions to ask every installer
Ask each installer to explain how they will make the gate safe, not just which motors they use. A competent answer will mention a risk assessment, photocells and safety edges where required, and force testing with a calibrated meter. They should also explain who will do the electrical work and how it will be certified.
- Will you carry out a written risk assessment for my site?
- How will you test closing forces at handover?
- Which safety devices are included in the price?
- Who installs and certifies the electrical supply?
- Will I receive a technical file and declaration of conformity?
- Do you hold public liability insurance, and can I see it?
- What servicing do you recommend, and what does it involve?
How to compare quotes properly
Electric gate quotes are hard to compare because they bundle different things. Ask for an itemised breakdown and lay the quotes side by side. Check whether each includes new posts or assumes the existing ones are fine, whether safety edges are included or listed as optional, and whether trenching and reinstating paving is covered.
A low quote that leaves out safety kit or groundworks will grow once the job starts, or leave you with a gate that needs upgrading later.
Check the lead time and programme too. Bespoke gates are usually made to order, so there may be several weeks between accepting a quote and the gates arriving. Ask how many days the team expects to be on site, whether concrete for new posts will be left to cure before the gates are hung, and when you can expect the electrical certificate and technical file to arrive.
| Quote item | Why it matters | Watch for |
|---|---|---|
| Gates and posts | Structure carries all the load | Assuming old posts are fine without checking |
| Motors and control board | Must suit gate weight and use | Undersized motors on heavy gates |
| Safety devices | Protects people and pets | Safety edges listed as extras |
| Electrical supply | Must meet BS 7671 | No mention of certification |
| Groundworks and making good | Trenching affects your drive | Paving left unrepaired |
| Commissioning and paperwork | Proves the gate is safe | No technical file offered |
Red flags to watch for
Be cautious of anyone who quotes without seeing the site, dismisses safety devices as unnecessary, or suggests turning up the force so a stiff gate closes. Equally, steer clear of installers who will not put the scope of work in writing or cannot explain how the gate will open in a power cut.
A credible installer will be happy to talk through the risk assessment, show you the force test results at handover and explain the maintenance the gate needs. If questions about safety are met with vague answers, keep looking.
What a proper handover looks like
On completion, the installer should demonstrate the gate, show you how to use the manual release, test the photocells and safety edges in front of you, and talk you through the fobs and access control. You should receive the technical file with the risk assessment and force test results, the declaration of conformity, user instructions and an electrical certificate.
Keep this paperwork with your house documents. It makes future servicing easier and is useful if you sell the property. When you request quotes through us, we pass your job to vetted, insured local specialists who work this way.
Matching the installer to the job
Not every installer suits every job. Some specialise in automating existing domestic gates, others in fabricating bespoke steel or hardwood gates, and some focus on commercial sites with heavy-duty sliding gates, barriers and access control. Ask what share of their work looks like yours and whether they make the gates themselves or buy them in from a fabricator. Neither approach is wrong, but it affects lead times and who you go back to if a weld or joint fails.
Ask which motor brands they fit and why. A competent installer will choose motors based on gate weight, leaf width, wind exposure and how many times a day the gate will cycle, rather than fitting the same kit everywhere. They should also be able to get spares for the motors they install for years to come.
Finally, consider location. A local installer can attend breakdowns and annual services more easily than someone travelling a long way. That matters with gates, because when a gate fails shut you want someone who can get to you quickly.
- Experience with gates of your type, size and material
- Clear explanation of motor choice for your gate
- Access to spares for the brands they fit
- Close enough to attend faults promptly
Questions people also ask
Should an electric gate installer be an electrician?
Not necessarily, but the electrical work must be done properly. Many gate installers employ or work with qualified electricians who install the supply to BS 7671 and issue a certificate. In England, a new outdoor circuit falls under Part P, so it must be notified or certified by someone competent to do so.
Is it worth getting more than one quote for electric gates?
Yes. Electric gates involve gates, automation, safety kit and groundworks, and installers approach each differently. Comparing two or three itemised quotes shows you what each includes and helps you spot one that has left out safety devices or groundworks. Make sure each installer has seen the site in person.
What aftercare should an installer offer?
A good installer will offer annual servicing, explain what it covers and be available for fault finding and repairs. Ask how quickly they can attend a breakdown, whether they hold common spares for the motors they fit, and whether they keep records of your gate's settings and test results.
Written and checked by the Electric Gate Installation team. Read our editorial policy.
More guides
How Much Do Electric Gates Cost in the UK? (2026 Guide)
In the UK in 2026, automating existing double swing gates typically costs £1,800–£3,200. Steel double swing gates with automation cost £4,500–£8,500,…
Sliding vs Swing Electric Gates: Which Is Right for Your Drive?
Choose swing gates if you have a level drive, enough space behind the gates for them to open, and want the lower cost. Choose a sliding gate if the…
Electric Gate Safety Rules in the UK: What Homeowners Must Know
In the UK, powered gates are treated as machinery. A new installation should follow the Supply of Machinery (Safety) Regulations 2008, with a risk…
Can You Automate Existing Gates? A Practical Guide
Yes, most existing gates can be automated if they are structurally sound, hang square and swing freely by hand, and the posts can carry the extra…
Get a free electric gate installation quote
Tell us what you need and we'll come back with a clear price.
Request a quote