Electric Gate Installation

Electric Gate Installation

Access Control and Intercoms

Keypads, video intercoms, GSM and app control, ANPR cameras and exit loops so you decide who gets in and how.

Free Electric Gate Installation quote

No obligation. We only use your details to reply about this job.

Access Control and Intercoms — Electric Gate Installation

What's involved

The way you open the gate matters as much as the gate itself. Basic systems use rolling-code remote fobs. Most households add a keypad on a post at driver-window height and a video intercom so visitors can be seen and let in from inside or from a phone app. GSM units let you open the gate by calling a number from an approved list, which works well for carers and deliveries. For busier sites, number-plate recognition cameras and induction loops cut out the need for fobs entirely. Cables usually run in the same ducting as the motor wiring, so it is cheaper to plan access control at the start than to add it later. Wi-Fi intercoms need a decent signal at the gate, so the installer may suggest a wired link or outdoor access point.

How we handle it

  1. Tell us about the entrance

    Use the quote form to describe the opening width, drive slope, existing gates or posts, and whether you want swing or sliding. Photos of both sides of the entrance help an installer price accurately before visiting.

  2. Site survey

    A local installer measures the opening, checks gradients and ground conditions, finds the nearest power supply and talks through gate style, motor type and access control options. They also note any hazards such as a public footpath alongside.

  3. Fixed written quote

    You receive one clear price covering the gates, posts, motors, groundworks, ducting, safety devices and commissioning. The quote states lead times for made-to-measure gates, which are often three to six weeks.

  4. Groundworks and installation

    Footings, ducts and tracks go in first and are left to cure. The gates are hung, motors and control board fitted, and safety devices wired. Most domestic jobs need two to four days on site in total.

  5. Commissioning and handover

    The installer sets the travel limits, tests force against an obstruction, checks every safety device and shows you how to use the manual release. You get the technical file, user guide and remote fobs.

Price guide

Electric gate prices depend on three things: the gates themselves, the automation and the groundworks. A pair of standard steel gates with ram motors on existing posts costs far less than bespoke hardwood gates on new brick piers with underground motors and a video intercom. The figures below are guide prices for typical UK homes in 2026 and include fitting.

  • Hardwood double swing gates with automation: £6,000–£11,000. Iroko or oak gates on steel frames, which add weight and need stronger motors and posts.
  • Steel double swing gates with automation: £4,500–£8,500. Made-to-measure metal gates up to about 4m wide, new steel posts, motors and basic safety kit.
  • Automation kit fitted to existing double swing gates: £1,800–£3,200. Ram motors, control board, photocells, warning light and two fobs, assuming the gates and posts are sound.

Questions about access control and intercoms

Are underground gate motors worth the extra cost?

They are worth it if appearance matters most, because the motor is hidden beneath the hinge. They cost more, are harder to service and need good drainage, as standing water in the foundation box is a common cause of failure. Ram motors are cheaper, easier to maintain and suit most homes.

Do electric gates need servicing?

Yes. Most manufacturers and installers recommend a service at least once a year, and more often for shared or commercial gates. A service checks hinges, motors, safety devices, battery backup and closing force. Regular servicing catches faults early and gives you a record showing the gate has been looked after.

Can my existing wooden gates be automated?

Often, yes, if the gates are solid, square and hung on sturdy posts. Rotten posts, sagging leaves or weak hinges need fixing first, because a motor will make any weakness worse. Heavy timber gates may need a steel frame on the back. An installer will inspect them before quoting for motors.

Get a free electric gate installation quote

Tell us what you need and we'll come back with a clear price.

Request a quote