Electric Gate Installation

Electric Gate Installation

Swing Gate Installation

Single or double swing gates on new or existing posts, with ram or underground motors sized to the gate weight, width and how exposed it is to wind.

Free Electric Gate Installation quote

No obligation. We only use your details to reply about this job.

Swing Gate Installation — Electric Gate Installation

What's involved

Swing gates are the most common choice for houses with a straight drive and room for the leaves to open inwards. The installer checks the drive gradient first, because a gate that swings uphill needs rising hinges or a cut-back drive. Steel or masonry posts are set in concrete footings, usually around 600mm deep, and left to cure before the gate is hung. Motors are either surface-mounted rams on the inside of each leaf or underground units buried in a steel foundation box beneath the hinge. Rams are cheaper and easier to service; underground motors keep the look clean but need good drainage. A typical double swing gate takes two to three days on site. You will need to clear the area, confirm where power can come from and decide which way the gates should open.

How we handle it

  1. Tell us about the entrance

    Use the quote form to describe the opening width, drive slope, existing gates or posts, and whether you want swing or sliding. Photos of both sides of the entrance help an installer price accurately before visiting.

  2. Site survey

    A local installer measures the opening, checks gradients and ground conditions, finds the nearest power supply and talks through gate style, motor type and access control options. They also note any hazards such as a public footpath alongside.

  3. Fixed written quote

    You receive one clear price covering the gates, posts, motors, groundworks, ducting, safety devices and commissioning. The quote states lead times for made-to-measure gates, which are often three to six weeks.

  4. Groundworks and installation

    Footings, ducts and tracks go in first and are left to cure. The gates are hung, motors and control board fitted, and safety devices wired. Most domestic jobs need two to four days on site in total.

  5. Commissioning and handover

    The installer sets the travel limits, tests force against an obstruction, checks every safety device and shows you how to use the manual release. You get the technical file, user guide and remote fobs.

Price guide

Electric gate prices depend on three things: the gates themselves, the automation and the groundworks. A pair of standard steel gates with ram motors on existing posts costs far less than bespoke hardwood gates on new brick piers with underground motors and a video intercom. The figures below are guide prices for typical UK homes in 2026 and include fitting.

  • Steel double swing gates with automation: £4,500–£8,500. Made-to-measure metal gates up to about 4m wide, new steel posts, motors and basic safety kit.
  • Automation kit fitted to existing double swing gates: £1,800–£3,200. Ram motors, control board, photocells, warning light and two fobs, assuming the gates and posts are sound.
  • Video intercom or GSM access control: £450–£1,500. Wired or app-based video intercoms and GSM units, including cabling to the house.

Questions about swing gate installation

How much does electric gate installation cost in the UK?

Most homeowners pay between £4,500 and £11,000 for new automated double gates fitted. Automating existing sound gates costs roughly £1,800 to £3,200. Sliding gates usually cost £6,500 to £13,000 because of the extra groundworks. Bespoke hardwood, underground motors, long cable runs and video intercoms all push the price up.

Swing or sliding gates: which is better?

It depends on your drive. Swing gates are cheaper and suit level drives with space for the leaves to open inwards. Sliding gates suit sloping drives, short driveways and openings where a parked car would block a swinging leaf. Sliding gates need a clear run beside the entrance at least as long as the gate.

Get a free electric gate installation quote

Tell us what you need and we'll come back with a clear price.

Request a quote