Leicestershire · East Midlands
Electric Gate Installation in Syston
We arrange electric gate installation in Syston, Mountsorrel and Leicester, covering new gates, automation retrofits, intercoms and safety upgrades.
Covering Syston and nearby
Syston is in the Leicestershire council area in the East Midlands. Jobs here are mostly in the LE7 and NG32 postcode areas. Nearby places we also cover include Birstall, Sileby, Thurmaston, Rothley and East Goscote.
What to expect in Syston
With the M1 running through it, the East Midlands is well placed for work across several counties in a single day. Victorian and Edwardian homes in Syston often have brick piers that look solid but have shallow foundations, so installers may add steel posts behind them to carry motor loads.
On country lanes around Syston, installers often set the gates back from the road so vehicles can pull fully off the lane while the gates open. Farm drives near Syston can carry tractors and delivery lorries, so posts, hinges and motors need to be sized for heavier, wider gates.
Electric Gate Installation services in Syston
Swing Gate Installation
Single or double swing gates on new or existing posts, with ram or underground motors sized to the gate weight, width and how exposed it is to wind.
Electric Gate Servicing and Repairs
Planned maintenance, fault finding and repairs for automated gates, including failed motors, burnt boards, broken hinges and misbehaving photocells.
Electric Gate Safety Upgrades
Bringing older automated gates up to current safety expectations with force testing, safety edges, extra photocells and a proper risk assessment.
Access Control and Intercoms
Keypads, video intercoms, GSM and app control, ANPR cameras and exit loops so you decide who gets in and how.
Gate Automation Retrofit
Adding motors, a control board and safety devices to gates you already have, after checking the gates and posts are strong enough.
Sliding Gate Installation
Track or cantilever sliding gates for sloping drives, short driveways and entrances where there is no space for leaves to swing.
Electric Gate Installation prices in Syston
- Hardwood double swing gates with automation: £6,000–£11,000. Iroko or oak gates on steel frames, which add weight and need stronger motors and posts.
- Sliding gate with track or cantilever system: £6,500–£13,000. Includes concrete base or track, rack and motor; cantilever designs sit at the upper end.
- Underground motors instead of rams: from £1,200. Extra cost per pair for foundation boxes, drainage and the motors themselves.
Prices are a guide. Your quote for Syston is a fixed price based on the details you give us. Full price guide.
Electric Gate Installation questions from Syston
Can you service an existing electric gate in Syston?
Yes. Engineers covering Syston service and repair most common gate motor brands, checking safety devices, force settings, hinges and battery backup. If parts are obsolete, they will explain the options for upgrading the control board or motors.
Do I need planning permission for electric gates in Syston?
Usually not for gates under 1 metre beside a road used by vehicles or 2 metres elsewhere. Taller gates, listed buildings and conservation areas may need consent from Leicestershire. Your installer can advise before you order.
Can my installer in Syston add an intercom to my gates?
Yes. Installers in Syston fit keypads, video intercoms, GSM units and app control. It is cheaper to add these during installation, because cables can share the same ducting as the motor wiring.
What gates suit a sloping drive in Syston?
Many drives in Syston slope towards the house or the road. Sliding gates are often the best answer because they run along the boundary. Swing gates can work with rising hinges or by lowering part of the drive under the leaves.
Are electric gates safe for children and pets?
They are when installed properly. A safe gate has force limiting, safety edges on the closing edges, photocells at more than one height and no exposed trapping points. Older gates with a single pair of photocells may not meet current expectations. A force test and risk assessment show whether your gate is safe.
What happens to electric gates in a power cut?
Every compliant electric gate has a manual release, usually a key-operated lever on the motor, so you can open it by hand. Many systems can also be fitted with battery backup that keeps the gates working for a set number of cycles during an outage. Your installer should show you how to use the release at handover.
Helpful guides
Sliding vs Swing Electric Gates: Which Is Right for Your Drive?
Choose swing gates if you have a level drive, enough space behind the gates for them to open, and want the lower cost. Choose a sliding…
Read the guide →How to Choose an Electric Gate Installer: Checks Before You Book
Choose an electric gate installer who carries out a site risk assessment, fits safety devices in line with BS EN 12453, force-tests the…
Read the guide →Get a free electric gate installation quote in Syston
Tell us what you need and we'll come back with a clear price.
Request a quote