Leicestershire · East Midlands
Electric Gate Installation in Mountsorrel
Planning electric gates for your home in Mountsorrel? Our local installers also cover Syston, and can advise on planning limits set by Leicestershire.
Tell us about your Mountsorrel driveway and get a clear price.
Mountsorrel and the surrounding area
Mountsorrel is in the Leicestershire council area in the East Midlands. Postcodes we cover here include LE12. The same team covers Birstall, Sileby, Barrow upon Soar, Thurmaston and Rothley too.
Working in Mountsorrel
With the M1 running through it, the East Midlands is well placed for work across several counties in a single day. On older homes in Mountsorrel, the drive may be narrower than modern cars need, so installers measure carefully and may suggest a single sliding gate.
Gravel and unmade drives outside Mountsorrel need firm concrete strips under tracks and around posts to stop gates dropping out of alignment. On country lanes around Mountsorrel, installers often set the gates back from the road so vehicles can pull fully off the lane while the gates open.
Our services in Mountsorrel
Swing Gate Installation
Single or double swing gates on new or existing posts, with ram or underground motors sized to the gate weight, width and how exposed it is to wind.
Sliding Gate Installation
Track or cantilever sliding gates for sloping drives, short driveways and entrances where there is no space for leaves to swing.
Gate Automation Retrofit
Adding motors, a control board and safety devices to gates you already have, after checking the gates and posts are strong enough.
Access Control and Intercoms
Keypads, video intercoms, GSM and app control, ANPR cameras and exit loops so you decide who gets in and how.
Electric Gate Safety Upgrades
Bringing older automated gates up to current safety expectations with force testing, safety edges, extra photocells and a proper risk assessment.
Electric Gate Servicing and Repairs
Planned maintenance, fault finding and repairs for automated gates, including failed motors, burnt boards, broken hinges and misbehaving photocells.
Guide prices for Mountsorrel
- Video intercom or GSM access control: £450–£1,500. Wired or app-based video intercoms and GSM units, including cabling to the house.
- Underground motors instead of rams: from £1,200. Extra cost per pair for foundation boxes, drainage and the motors themselves.
- Sliding gate with track or cantilever system: £6,500–£13,000. Includes concrete base or track, rack and motor; cantilever designs sit at the upper end.
Prices are a guide. Your quote for Mountsorrel is a fixed price based on the details you give us. Full price guide.
Electric Gate Installation questions from Mountsorrel
Will electric gates in Mountsorrel cope with winter weather?
Good-quality motors are rated for sub-zero temperatures. Installers serving Mountsorrel also make sure underground motor boxes drain properly and tracks are kept clear, as ice and standing water cause most winter faults.
Can my installer in Mountsorrel add an intercom to my gates?
Yes. Installers in Mountsorrel fit keypads, video intercoms, GSM units and app control. It is cheaper to add these during installation, because cables can share the same ducting as the motor wiring.
Are solar-powered electric gates an option near Mountsorrel?
For rural entrances around Mountsorrel far from mains power, solar kits with battery storage work well for gates used a modest number of times a day. Busy entrances still benefit from a mains supply.
Can I get a sliding gate on a short drive in Mountsorrel?
Yes, as long as there is a clear run beside the entrance roughly as long as the gate. Sliding gates are popular on short Mountsorrel drives because they keep the space behind the gate free for parking.
Do electric gates need a separate power supply?
Most mains-powered gates need a dedicated fused spur run in armoured cable from your consumer unit to the control box. This part should be done by a qualified electrician. Low-voltage motor and safety wiring then runs in ducting. Solar-powered kits are available for remote gates without mains power nearby.
How long does it take to install electric gates?
On site, most domestic installations take two to four days, including time for concrete to cure. Before that, made-to-measure gates typically take three to six weeks to manufacture. Retrofitting motors to existing gates can often be done in one or two days if the posts and hinges are in good condition.
Helpful guides
Sliding vs Swing Electric Gates: Which Is Right for Your Drive?
Choose swing gates if you have a level drive, enough space behind the gates for them to open, and want the lower cost. Choose a sliding…
Read the guide →How to Choose an Electric Gate Installer: Checks Before You Book
Choose an electric gate installer who carries out a site risk assessment, fits safety devices in line with BS EN 12453, force-tests the…
Read the guide →Get a free electric gate installation quote in Mountsorrel
Tell us what you need and we'll come back with a clear price.
Request a quote