Kent · South East
Electric Gate Installation in Folkestone
Electric gates in Folkestone have to cope with local weather, sloping drives and busy roads. Our installers across the the South East plan for all three before fitting.
Tell us about your Folkestone driveway and get a clear price.
Our Folkestone coverage
We cover all of Folkestone and the wider Kent area. That includes the CT20, CT19 and CT21 postcode districts. The same team covers Hawkinge and Capel-le-Ferne too.
Local considerations in Folkestone
The South East has a large share of 1930s semi-detached housing and post-war estates, with plenty of new-build development around its larger towns. Victorian and Edwardian homes in Folkestone often have brick piers that look solid but have shallow foundations, so installers may add steel posts behind them to carry motor loads. Salt air near the coast at Folkestone attacks bare steel, so installers recommend galvanised and powder-coated gates and stainless fixings.
Suburban drives in Folkestone usually suit double swing gates with ram motors, giving a secure frontage without the cost of heavy groundworks. Many semi-detached homes in Folkestone have a side drive with a slope towards the house, which installers check closely before recommending swing or sliding gates.
Electric Gate Installation jobs we handle in Folkestone
Gate Automation Retrofit
Adding motors, a control board and safety devices to gates you already have, after checking the gates and posts are strong enough.
Access Control and Intercoms
Keypads, video intercoms, GSM and app control, ANPR cameras and exit loops so you decide who gets in and how.
Electric Gate Safety Upgrades
Bringing older automated gates up to current safety expectations with force testing, safety edges, extra photocells and a proper risk assessment.
Electric Gate Servicing and Repairs
Planned maintenance, fault finding and repairs for automated gates, including failed motors, burnt boards, broken hinges and misbehaving photocells.
Swing Gate Installation
Single or double swing gates on new or existing posts, with ram or underground motors sized to the gate weight, width and how exposed it is to wind.
Sliding Gate Installation
Track or cantilever sliding gates for sloping drives, short driveways and entrances where there is no space for leaves to swing.
How much it costs in Folkestone
- Sliding gate with track or cantilever system: £6,500–£13,000. Includes concrete base or track, rack and motor; cantilever designs sit at the upper end.
- Hardwood double swing gates with automation: £6,000–£11,000. Iroko or oak gates on steel frames, which add weight and need stronger motors and posts.
- Steel double swing gates with automation: £4,500–£8,500. Made-to-measure metal gates up to about 4m wide, new steel posts, motors and basic safety kit.
Prices are a guide. Your quote for Folkestone is a fixed price based on the details you give us. Full price guide.
Electric Gate Installation questions from Folkestone
Will electric gates in Folkestone cope with winter weather?
Good-quality motors are rated for sub-zero temperatures. Installers serving Folkestone also make sure underground motor boxes drain properly and tracks are kept clear, as ice and standing water cause most winter faults.
How much do electric gates cost in Folkestone?
Most homeowners in Folkestone pay between £4,500 and £11,000 for new automated gates fitted, depending on size, material and groundworks. Automating sound existing gates usually costs £1,800 to £3,200. A local installer will give you a fixed price after a site survey.
Do I need planning permission for electric gates in Folkestone?
Usually not for gates under 1 metre beside a road used by vehicles or 2 metres elsewhere. Taller gates, listed buildings and conservation areas may need consent from Kent. Your installer can advise before you order.
How soon can electric gates be fitted in Folkestone?
Surveys in Folkestone can usually be booked within a week or two. Made-to-measure gates take around three to six weeks to manufacture, then two to four days to install. Automation retrofits on existing gates can often be fitted sooner.
Do electric gates need servicing?
Yes. Most manufacturers and installers recommend a service at least once a year, and more often for shared or commercial gates. A service checks hinges, motors, safety devices, battery backup and closing force. Regular servicing catches faults early and gives you a record showing the gate has been looked after.
Can my existing wooden gates be automated?
Often, yes, if the gates are solid, square and hung on sturdy posts. Rotten posts, sagging leaves or weak hinges need fixing first, because a motor will make any weakness worse. Heavy timber gates may need a steel frame on the back. An installer will inspect them before quoting for motors.
Helpful guides
Sliding vs Swing Electric Gates: Which Is Right for Your Drive?
Choose swing gates if you have a level drive, enough space behind the gates for them to open, and want the lower cost. Choose a sliding…
Read the guide →How to Choose an Electric Gate Installer: Checks Before You Book
Choose an electric gate installer who carries out a site risk assessment, fits safety devices in line with BS EN 12453, force-tests the…
Read the guide →Get a free electric gate installation quote in Folkestone
Tell us what you need and we'll come back with a clear price.
Request a quote