Kent · South East
Electric Gate Installation in Margate
Need automated gates in Margate? Send us your details and a vetted installer covering Kent will arrange a site survey and a clear, fixed quote.
Our Margate coverage
Margate falls within Kent, South East. That includes the CT9, CT7, CT8, CT10 and CT12 postcode districts. We also take jobs in Thanet and Cliffs End.
Local considerations in Margate
Suburban drives in Margate usually suit double swing gates with ram motors, giving a secure frontage without the cost of heavy groundworks. Where Margate homes have block-paved drives, installers lift and relay paviors carefully to bury ducting and footings without leaving obvious patches.
The South East has a large share of 1930s semi-detached housing and post-war estates, with plenty of new-build development around its larger towns. On older homes in Margate, the drive may be narrower than modern cars need, so installers measure carefully and may suggest a single sliding gate. Salt air near the coast at Margate attacks bare steel, so installers recommend galvanised and powder-coated gates and stainless fixings.
Electric Gate Installation jobs we handle in Margate
Swing Gate Installation
Single or double swing gates on new or existing posts, with ram or underground motors sized to the gate weight, width and how exposed it is to wind.
Electric Gate Servicing and Repairs
Planned maintenance, fault finding and repairs for automated gates, including failed motors, burnt boards, broken hinges and misbehaving photocells.
Electric Gate Safety Upgrades
Bringing older automated gates up to current safety expectations with force testing, safety edges, extra photocells and a proper risk assessment.
Access Control and Intercoms
Keypads, video intercoms, GSM and app control, ANPR cameras and exit loops so you decide who gets in and how.
Gate Automation Retrofit
Adding motors, a control board and safety devices to gates you already have, after checking the gates and posts are strong enough.
Sliding Gate Installation
Track or cantilever sliding gates for sloping drives, short driveways and entrances where there is no space for leaves to swing.
How much it costs in Margate
- Automation kit fitted to existing double swing gates: £1,800–£3,200. Ram motors, control board, photocells, warning light and two fobs, assuming the gates and posts are sound.
- Video intercom or GSM access control: £450–£1,500. Wired or app-based video intercoms and GSM units, including cabling to the house.
- Underground motors instead of rams: from £1,200. Extra cost per pair for foundation boxes, drainage and the motors themselves.
Prices are a guide. Your quote for Margate is a fixed price based on the details you give us. Full price guide.
Electric Gate Installation questions from Margate
Can you service an existing electric gate in Margate?
Yes. Engineers covering Margate service and repair most common gate motor brands, checking safety devices, force settings, hinges and battery backup. If parts are obsolete, they will explain the options for upgrading the control board or motors.
Do your installers cover areas near Margate?
Yes. Our network covers Margate and surrounding areas including Broadstairs and Ramsgate. Enter your postcode on the quote form and we will match you with an installer who regularly works in your area.
How soon can electric gates be fitted in Margate?
Surveys in Margate can usually be booked within a week or two. Made-to-measure gates take around three to six weeks to manufacture, then two to four days to install. Automation retrofits on existing gates can often be fitted sooner.
Do I need planning permission for electric gates in Margate?
Usually not for gates under 1 metre beside a road used by vehicles or 2 metres elsewhere. Taller gates, listed buildings and conservation areas may need consent from Kent. Your installer can advise before you order.
What happens to electric gates in a power cut?
Every compliant electric gate has a manual release, usually a key-operated lever on the motor, so you can open it by hand. Many systems can also be fitted with battery backup that keeps the gates working for a set number of cycles during an outage. Your installer should show you how to use the release at handover.
How long does it take to install electric gates?
On site, most domestic installations take two to four days, including time for concrete to cure. Before that, made-to-measure gates typically take three to six weeks to manufacture. Retrofitting motors to existing gates can often be done in one or two days if the posts and hinges are in good condition.
Helpful guides
Electric Gate Safety Rules in the UK: What Homeowners Must Know
In the UK, powered gates are treated as machinery. A new installation should follow the Supply of Machinery (Safety) Regulations 2008, with…
Read the guide →Sliding vs Swing Electric Gates: Which Is Right for Your Drive?
Choose swing gates if you have a level drive, enough space behind the gates for them to open, and want the lower cost. Choose a sliding…
Read the guide →Get a free electric gate installation quote in Margate
Tell us what you need and we'll come back with a clear price.
Request a quote