Cambridgeshire · Eastern
Electric Gate Installation in Ely
Planning electric gates for your home in Ely? Our local installers also cover Newmarket, and can advise on planning limits set by Cambridgeshire.
Ely and the surrounding area
Ely falls within Cambridgeshire, Eastern. That includes the CB6 and CB7 postcode districts. We also take jobs in Littleport, Witchford, Little Downham and Stretham.
Working in Ely
Farm drives near Ely can carry tractors and delivery lorries, so posts, hinges and motors need to be sized for heavier, wider gates. On country lanes around Ely, installers often set the gates back from the road so vehicles can pull fully off the lane while the gates open.
Across the East of England you find older timber-framed and brick cottages in the villages and large modern estates around the expanding towns. Many newer properties in Ely have an external power point near the drive, which can cut the cost of getting a supply to the gate.
Our services in Ely
Access Control and Intercoms
Keypads, video intercoms, GSM and app control, ANPR cameras and exit loops so you decide who gets in and how.
Gate Automation Retrofit
Adding motors, a control board and safety devices to gates you already have, after checking the gates and posts are strong enough.
Sliding Gate Installation
Track or cantilever sliding gates for sloping drives, short driveways and entrances where there is no space for leaves to swing.
Swing Gate Installation
Single or double swing gates on new or existing posts, with ram or underground motors sized to the gate weight, width and how exposed it is to wind.
Electric Gate Servicing and Repairs
Planned maintenance, fault finding and repairs for automated gates, including failed motors, burnt boards, broken hinges and misbehaving photocells.
Electric Gate Safety Upgrades
Bringing older automated gates up to current safety expectations with force testing, safety edges, extra photocells and a proper risk assessment.
Guide prices for Ely
- Steel double swing gates with automation: £4,500–£8,500. Made-to-measure metal gates up to about 4m wide, new steel posts, motors and basic safety kit.
- Automation kit fitted to existing double swing gates: £1,800–£3,200. Ram motors, control board, photocells, warning light and two fobs, assuming the gates and posts are sound.
- Video intercom or GSM access control: £450–£1,500. Wired or app-based video intercoms and GSM units, including cabling to the house.
Prices are a guide. Your quote for Ely is a fixed price based on the details you give us. Full price guide.
Electric Gate Installation questions from Ely
What gates suit a sloping drive in Ely?
Many drives in Ely slope towards the house or the road. Sliding gates are often the best answer because they run along the boundary. Swing gates can work with rising hinges or by lowering part of the drive under the leaves.
How soon can electric gates be fitted in Ely?
Surveys in Ely can usually be booked within a week or two. Made-to-measure gates take around three to six weeks to manufacture, then two to four days to install. Automation retrofits on existing gates can often be fitted sooner.
Will electric gates in Ely cope with winter weather?
Good-quality motors are rated for sub-zero temperatures. Installers serving Ely also make sure underground motor boxes drain properly and tracks are kept clear, as ice and standing water cause most winter faults.
Can I get a sliding gate on a short drive in Ely?
Yes, as long as there is a clear run beside the entrance roughly as long as the gate. Sliding gates are popular on short Ely drives because they keep the space behind the gate free for parking.
Can I open my electric gate from my phone?
Yes. Many control boards accept Wi-Fi or GSM modules that let you open the gate from an app or by calling it from an approved number. Video intercoms can show who is at the gate on your phone. Good signal at the gate is essential, so installers sometimes add an outdoor access point.
Do electric gates need a separate power supply?
Most mains-powered gates need a dedicated fused spur run in armoured cable from your consumer unit to the control box. This part should be done by a qualified electrician. Low-voltage motor and safety wiring then runs in ducting. Solar-powered kits are available for remote gates without mains power nearby.
Helpful guides
How to Choose an Electric Gate Installer: Checks Before You Book
Choose an electric gate installer who carries out a site risk assessment, fits safety devices in line with BS EN 12453, force-tests the…
Read the guide →Can You Automate Existing Gates? A Practical Guide
Yes, most existing gates can be automated if they are structurally sound, hang square and swing freely by hand, and the posts can carry the…
Read the guide →Get a free electric gate installation quote in Ely
Tell us what you need and we'll come back with a clear price.
Request a quote