Staffordshire · West Midlands
Electric Gate Installation in Burntwood
Need automated gates in Burntwood? Send us your details and a vetted installer covering Staffordshire will arrange a site survey and a clear, fixed quote.
Burntwood and the surrounding area
Burntwood falls within Staffordshire, West Midlands. Jobs here are mostly in the WS7 postcode areas. Nearby places we also cover include Brownhills, Pelsall, Norton Canes, Cannock Chase and Rawnsley.
Working in Burntwood
The West Midlands motorway network makes it one of the easiest areas in the country to reach quickly, which helps with short-notice work. On older homes in Burntwood, the drive may be narrower than modern cars need, so installers measure carefully and may suggest a single sliding gate.
Where Burntwood homes have block-paved drives, installers lift and relay paviors carefully to bury ducting and footings without leaving obvious patches. Families in the quieter streets of Burntwood often add electric gates to keep children and dogs safely inside the front garden.
Our services in Burntwood
Swing Gate Installation
Single or double swing gates on new or existing posts, with ram or underground motors sized to the gate weight, width and how exposed it is to wind.
Electric Gate Servicing and Repairs
Planned maintenance, fault finding and repairs for automated gates, including failed motors, burnt boards, broken hinges and misbehaving photocells.
Electric Gate Safety Upgrades
Bringing older automated gates up to current safety expectations with force testing, safety edges, extra photocells and a proper risk assessment.
Access Control and Intercoms
Keypads, video intercoms, GSM and app control, ANPR cameras and exit loops so you decide who gets in and how.
Gate Automation Retrofit
Adding motors, a control board and safety devices to gates you already have, after checking the gates and posts are strong enough.
Sliding Gate Installation
Track or cantilever sliding gates for sloping drives, short driveways and entrances where there is no space for leaves to swing.
Guide prices for Burntwood
- Hardwood double swing gates with automation: £6,000–£11,000. Iroko or oak gates on steel frames, which add weight and need stronger motors and posts.
- Sliding gate with track or cantilever system: £6,500–£13,000. Includes concrete base or track, rack and motor; cantilever designs sit at the upper end.
- Underground motors instead of rams: from £1,200. Extra cost per pair for foundation boxes, drainage and the motors themselves.
Prices are a guide. Your quote for Burntwood is a fixed price based on the details you give us. Full price guide.
Electric Gate Installation questions from Burntwood
Do I need planning permission for electric gates in Burntwood?
Usually not for gates under 1 metre beside a road used by vehicles or 2 metres elsewhere. Taller gates, listed buildings and conservation areas may need consent from Staffordshire. Your installer can advise before you order.
Can my installer in Burntwood add an intercom to my gates?
Yes. Installers in Burntwood fit keypads, video intercoms, GSM units and app control. It is cheaper to add these during installation, because cables can share the same ducting as the motor wiring.
What gates suit a sloping drive in Burntwood?
Many drives in Burntwood slope towards the house or the road. Sliding gates are often the best answer because they run along the boundary. Swing gates can work with rising hinges or by lowering part of the drive under the leaves.
How soon can electric gates be fitted in Burntwood?
Surveys in Burntwood can usually be booked within a week or two. Made-to-measure gates take around three to six weeks to manufacture, then two to four days to install. Automation retrofits on existing gates can often be fitted sooner.
Do electric gates need a separate power supply?
Most mains-powered gates need a dedicated fused spur run in armoured cable from your consumer unit to the control box. This part should be done by a qualified electrician. Low-voltage motor and safety wiring then runs in ducting. Solar-powered kits are available for remote gates without mains power nearby.
How long does it take to install electric gates?
On site, most domestic installations take two to four days, including time for concrete to cure. Before that, made-to-measure gates typically take three to six weeks to manufacture. Retrofitting motors to existing gates can often be done in one or two days if the posts and hinges are in good condition.
Helpful guides
How Much Do Electric Gates Cost in the UK? (2026 Guide)
In the UK in 2026, automating existing double swing gates typically costs £1,800–£3,200. Steel double swing gates with automation cost…
Read the guide →How to Choose an Electric Gate Installer: Checks Before You Book
Choose an electric gate installer who carries out a site risk assessment, fits safety devices in line with BS EN 12453, force-tests the…
Read the guide →Get a free electric gate installation quote in Burntwood
Tell us what you need and we'll come back with a clear price.
Request a quote