Angus · Scotland
Electric Gate Installation in Arbroath
If your Arbroath property needs a safer, more secure entrance, our network of local installers can fit electric gates built and tested to current safety standards.
Covering Arbroath and nearby
We cover all of Arbroath and the wider Angus area. Jobs here are mostly in the DD11 postcode areas.
What to expect in Arbroath
Farm drives near Arbroath can carry tractors and delivery lorries, so posts, hinges and motors need to be sized for heavier, wider gates. On country lanes around Arbroath, installers often set the gates back from the road so vehicles can pull fully off the lane while the gates open.
Tenement closes, shared repairs and a wetter climate are typical considerations for work in Scotland's towns and cities. Modern homes in Arbroath often have a level, block-paved drive that suits sleek aluminium sliding or swing gates with app control. Salt air near the coast at Arbroath attacks bare steel, so installers recommend galvanised and powder-coated gates and stainless fixings. In Scotland, permitted development rules for gates and walls differ from England, so installers serving Arbroath check with Angus before fitting taller gates.
Electric Gate Installation services in Arbroath
Electric Gate Servicing and Repairs
Planned maintenance, fault finding and repairs for automated gates, including failed motors, burnt boards, broken hinges and misbehaving photocells.
Swing Gate Installation
Single or double swing gates on new or existing posts, with ram or underground motors sized to the gate weight, width and how exposed it is to wind.
Sliding Gate Installation
Track or cantilever sliding gates for sloping drives, short driveways and entrances where there is no space for leaves to swing.
Gate Automation Retrofit
Adding motors, a control board and safety devices to gates you already have, after checking the gates and posts are strong enough.
Access Control and Intercoms
Keypads, video intercoms, GSM and app control, ANPR cameras and exit loops so you decide who gets in and how.
Electric Gate Safety Upgrades
Bringing older automated gates up to current safety expectations with force testing, safety edges, extra photocells and a proper risk assessment.
Electric Gate Installation prices in Arbroath
- Video intercom or GSM access control: £450–£1,500. Wired or app-based video intercoms and GSM units, including cabling to the house.
- Underground motors instead of rams: from £1,200. Extra cost per pair for foundation boxes, drainage and the motors themselves.
- Sliding gate with track or cantilever system: £6,500–£13,000. Includes concrete base or track, rack and motor; cantilever designs sit at the upper end.
Prices are a guide. Your quote for Arbroath is a fixed price based on the details you give us. Full price guide.
Electric Gate Installation questions from Arbroath
Do I need planning permission for electric gates in Arbroath?
Usually not for gates under 1 metre beside a road used by vehicles or 2 metres elsewhere. Taller gates, listed buildings and conservation areas may need consent from Angus. Your installer can advise before you order.
Can my installer in Arbroath add an intercom to my gates?
Yes. Installers in Arbroath fit keypads, video intercoms, GSM units and app control. It is cheaper to add these during installation, because cables can share the same ducting as the motor wiring.
What gates suit a sloping drive in Arbroath?
Many drives in Arbroath slope towards the house or the road. Sliding gates are often the best answer because they run along the boundary. Swing gates can work with rising hinges or by lowering part of the drive under the leaves.
How soon can electric gates be fitted in Arbroath?
Surveys in Arbroath can usually be booked within a week or two. Made-to-measure gates take around three to six weeks to manufacture, then two to four days to install. Automation retrofits on existing gates can often be fitted sooner.
Swing or sliding gates: which is better?
It depends on your drive. Swing gates are cheaper and suit level drives with space for the leaves to open inwards. Sliding gates suit sloping drives, short driveways and openings where a parked car would block a swinging leaf. Sliding gates need a clear run beside the entrance at least as long as the gate.
How long does it take to install electric gates?
On site, most domestic installations take two to four days, including time for concrete to cure. Before that, made-to-measure gates typically take three to six weeks to manufacture. Retrofitting motors to existing gates can often be done in one or two days if the posts and hinges are in good condition.
Helpful guides
How to Choose an Electric Gate Installer: Checks Before You Book
Choose an electric gate installer who carries out a site risk assessment, fits safety devices in line with BS EN 12453, force-tests the…
Read the guide →Can You Automate Existing Gates? A Practical Guide
Yes, most existing gates can be automated if they are structurally sound, hang square and swing freely by hand, and the posts can carry the…
Read the guide →Get a free electric gate installation quote in Arbroath
Tell us what you need and we'll come back with a clear price.
Request a quote