Electric Gate Installation

Oxfordshire · South East

Electric Gate Installation in Thame

Electric gates in Thame have to cope with local weather, sloping drives and busy roads. Our installers across the the South East plan for all three before fitting.

Book your electric gate survey in Thame now.

Free Electric Gate Installation quote in Thame

No obligation. We only use your details to reply about this job.

Thame and the surrounding area

Thame falls within Oxfordshire, South East. Postcodes we cover here include OX9. Nearby places we also cover include Chinnor, Long Crendon and Chearsley.

Working in Thame

Commuter towns across the South East mix older town-centre terraces with large newer estates, and driveways are more common than in London. Period properties in Thame often suit traditional timber or wrought-iron style gates, which can be automated with discreet underground motors.

On country lanes around Thame, installers often set the gates back from the road so vehicles can pull fully off the lane while the gates open. Gravel and unmade drives outside Thame need firm concrete strips under tracks and around posts to stop gates dropping out of alignment.

Guide prices for Thame

  • Underground motors instead of rams: from £1,200. Extra cost per pair for foundation boxes, drainage and the motors themselves.
  • Video intercom or GSM access control: £450–£1,500. Wired or app-based video intercoms and GSM units, including cabling to the house.
  • Automation kit fitted to existing double swing gates: £1,800–£3,200. Ram motors, control board, photocells, warning light and two fobs, assuming the gates and posts are sound.

Prices are a guide. Your quote for Thame is a fixed price based on the details you give us. Full price guide.

Electric Gate Installation questions from Thame

Do I need planning permission for electric gates in Thame?

Usually not for gates under 1 metre beside a road used by vehicles or 2 metres elsewhere. Taller gates, listed buildings and conservation areas may need consent from Oxfordshire. Your installer can advise before you order.

Can my installer in Thame add an intercom to my gates?

Yes. Installers in Thame fit keypads, video intercoms, GSM units and app control. It is cheaper to add these during installation, because cables can share the same ducting as the motor wiring.

What gates suit a sloping drive in Thame?

Many drives in Thame slope towards the house or the road. Sliding gates are often the best answer because they run along the boundary. Swing gates can work with rising hinges or by lowering part of the drive under the leaves.

How soon can electric gates be fitted in Thame?

Surveys in Thame can usually be booked within a week or two. Made-to-measure gates take around three to six weeks to manufacture, then two to four days to install. Automation retrofits on existing gates can often be fitted sooner.

Do electric gates need a separate power supply?

Most mains-powered gates need a dedicated fused spur run in armoured cable from your consumer unit to the control box. This part should be done by a qualified electrician. Low-voltage motor and safety wiring then runs in ducting. Solar-powered kits are available for remote gates without mains power nearby.

Are electric gates safe for children and pets?

They are when installed properly. A safe gate has force limiting, safety edges on the closing edges, photocells at more than one height and no exposed trapping points. Older gates with a single pair of photocells may not meet current expectations. A force test and risk assessment show whether your gate is safe.

Get a free electric gate installation quote in Thame

Tell us what you need and we'll come back with a clear price.

Request a quote