Surrey · South East
Electric Gate Installation in Reigate
From short town-house drives to wide country entrances, our installers fit swing and sliding electric gates throughout Reigate and the wider the South East.
Covering Reigate and nearby
Reigate is in the Surrey council area in the South East. That includes the RH2 and RH1 postcode districts. The same team covers Reigate and Banstead, South Merstham, Lower Kingswood, Walton on the Hill and Brockham too.
What to expect in Reigate
Farm drives near Reigate can carry tractors and delivery lorries, so posts, hinges and motors need to be sized for heavier, wider gates. On country lanes around Reigate, installers often set the gates back from the road so vehicles can pull fully off the lane while the gates open.
Clay soils across much of the South East move with the seasons, which affects anything built into the ground, from walls and bases to drainage. Victorian and Edwardian homes in Reigate often have brick piers that look solid but have shallow foundations, so installers may add steel posts behind them to carry motor loads.
Electric Gate Installation services in Reigate
Electric Gate Safety Upgrades
Bringing older automated gates up to current safety expectations with force testing, safety edges, extra photocells and a proper risk assessment.
Electric Gate Servicing and Repairs
Planned maintenance, fault finding and repairs for automated gates, including failed motors, burnt boards, broken hinges and misbehaving photocells.
Swing Gate Installation
Single or double swing gates on new or existing posts, with ram or underground motors sized to the gate weight, width and how exposed it is to wind.
Sliding Gate Installation
Track or cantilever sliding gates for sloping drives, short driveways and entrances where there is no space for leaves to swing.
Gate Automation Retrofit
Adding motors, a control board and safety devices to gates you already have, after checking the gates and posts are strong enough.
Access Control and Intercoms
Keypads, video intercoms, GSM and app control, ANPR cameras and exit loops so you decide who gets in and how.
Electric Gate Installation prices in Reigate
- Hardwood double swing gates with automation: £6,000–£11,000. Iroko or oak gates on steel frames, which add weight and need stronger motors and posts.
- Steel double swing gates with automation: £4,500–£8,500. Made-to-measure metal gates up to about 4m wide, new steel posts, motors and basic safety kit.
- Automation kit fitted to existing double swing gates: £1,800–£3,200. Ram motors, control board, photocells, warning light and two fobs, assuming the gates and posts are sound.
Prices are a guide. Your quote for Reigate is a fixed price based on the details you give us. Full price guide.
Electric Gate Installation questions from Reigate
How soon can electric gates be fitted in Reigate?
Surveys in Reigate can usually be booked within a week or two. Made-to-measure gates take around three to six weeks to manufacture, then two to four days to install. Automation retrofits on existing gates can often be fitted sooner.
Will electric gates in Reigate cope with winter weather?
Good-quality motors are rated for sub-zero temperatures. Installers serving Reigate also make sure underground motor boxes drain properly and tracks are kept clear, as ice and standing water cause most winter faults.
Can I get a sliding gate on a short drive in Reigate?
Yes, as long as there is a clear run beside the entrance roughly as long as the gate. Sliding gates are popular on short Reigate drives because they keep the space behind the gate free for parking.
Do your installers cover areas near Reigate?
Yes. Our network covers Reigate and surrounding areas including Dorking and Caterham. Enter your postcode on the quote form and we will match you with an installer who regularly works in your area.
Do electric gates need servicing?
Yes. Most manufacturers and installers recommend a service at least once a year, and more often for shared or commercial gates. A service checks hinges, motors, safety devices, battery backup and closing force. Regular servicing catches faults early and gives you a record showing the gate has been looked after.
Can my existing wooden gates be automated?
Often, yes, if the gates are solid, square and hung on sturdy posts. Rotten posts, sagging leaves or weak hinges need fixing first, because a motor will make any weakness worse. Heavy timber gates may need a steel frame on the back. An installer will inspect them before quoting for motors.
Helpful guides
How Much Do Electric Gates Cost in the UK? (2026 Guide)
In the UK in 2026, automating existing double swing gates typically costs £1,800–£3,200. Steel double swing gates with automation cost…
Read the guide →Electric Gate Safety Rules in the UK: What Homeowners Must Know
In the UK, powered gates are treated as machinery. A new installation should follow the Supply of Machinery (Safety) Regulations 2008, with…
Read the guide →Get a free electric gate installation quote in Reigate
Tell us what you need and we'll come back with a clear price.
Request a quote