Cheshire East · North West
Electric Gate Installation in Poynton
If your Poynton property needs a safer, more secure entrance, our network of local installers can fit electric gates built and tested to current safety standards.
Secure your Poynton home with professionally fitted electric gates.
Poynton and the surrounding area
Poynton falls within Cheshire East, North West. That includes the SK12 and SK10 postcode districts. The same team covers Bollington, Handforth, Disley and Dean Row too.
Working in Poynton
The North West is one of the wetter regions of England, and its towns are built around dense Victorian terraces as well as large post-war and modern estates. Victorian and Edwardian homes in Poynton often have brick piers that look solid but have shallow foundations, so installers may add steel posts behind them to carry motor loads.
Gravel and unmade drives outside Poynton need firm concrete strips under tracks and around posts to stop gates dropping out of alignment. On country lanes around Poynton, installers often set the gates back from the road so vehicles can pull fully off the lane while the gates open.
Our services in Poynton
Gate Automation Retrofit
Adding motors, a control board and safety devices to gates you already have, after checking the gates and posts are strong enough.
Access Control and Intercoms
Keypads, video intercoms, GSM and app control, ANPR cameras and exit loops so you decide who gets in and how.
Electric Gate Safety Upgrades
Bringing older automated gates up to current safety expectations with force testing, safety edges, extra photocells and a proper risk assessment.
Electric Gate Servicing and Repairs
Planned maintenance, fault finding and repairs for automated gates, including failed motors, burnt boards, broken hinges and misbehaving photocells.
Swing Gate Installation
Single or double swing gates on new or existing posts, with ram or underground motors sized to the gate weight, width and how exposed it is to wind.
Sliding Gate Installation
Track or cantilever sliding gates for sloping drives, short driveways and entrances where there is no space for leaves to swing.
Guide prices for Poynton
- Video intercom or GSM access control: £450–£1,500. Wired or app-based video intercoms and GSM units, including cabling to the house.
- Underground motors instead of rams: from £1,200. Extra cost per pair for foundation boxes, drainage and the motors themselves.
- Sliding gate with track or cantilever system: £6,500–£13,000. Includes concrete base or track, rack and motor; cantilever designs sit at the upper end.
Prices are a guide. Your quote for Poynton is a fixed price based on the details you give us. Full price guide.
Electric Gate Installation questions from Poynton
Are solar-powered electric gates an option near Poynton?
For rural entrances around Poynton far from mains power, solar kits with battery storage work well for gates used a modest number of times a day. Busy entrances still benefit from a mains supply.
Can I get a sliding gate on a short drive in Poynton?
Yes, as long as there is a clear run beside the entrance roughly as long as the gate. Sliding gates are popular on short Poynton drives because they keep the space behind the gate free for parking.
What gates suit a sloping drive in Poynton?
Many drives in Poynton slope towards the house or the road. Sliding gates are often the best answer because they run along the boundary. Swing gates can work with rising hinges or by lowering part of the drive under the leaves.
Can you service an existing electric gate in Poynton?
Yes. Engineers covering Poynton service and repair most common gate motor brands, checking safety devices, force settings, hinges and battery backup. If parts are obsolete, they will explain the options for upgrading the control board or motors.
How long does it take to install electric gates?
On site, most domestic installations take two to four days, including time for concrete to cure. Before that, made-to-measure gates typically take three to six weeks to manufacture. Retrofitting motors to existing gates can often be done in one or two days if the posts and hinges are in good condition.
Do electric gates need a separate power supply?
Most mains-powered gates need a dedicated fused spur run in armoured cable from your consumer unit to the control box. This part should be done by a qualified electrician. Low-voltage motor and safety wiring then runs in ducting. Solar-powered kits are available for remote gates without mains power nearby.
Helpful guides
Electric Gate Safety Rules in the UK: What Homeowners Must Know
In the UK, powered gates are treated as machinery. A new installation should follow the Supply of Machinery (Safety) Regulations 2008, with…
Read the guide →How Much Do Electric Gates Cost in the UK? (2026 Guide)
In the UK in 2026, automating existing double swing gates typically costs £1,800–£3,200. Steel double swing gates with automation cost…
Read the guide →Get a free electric gate installation quote in Poynton
Tell us what you need and we'll come back with a clear price.
Request a quote