Lincolnshire · East Midlands
Electric Gate Installation in Bourne
If your Bourne property needs a safer, more secure entrance, our network of local installers can fit electric gates built and tested to current safety standards.
Covering Bourne and nearby
Bourne is in the Lincolnshire council area in the East Midlands. Jobs here are mostly in the PE10 postcode areas. Nearby places we also cover include Baston.
What to expect in Bourne
The East Midlands has a large stock of red-brick terraces and inter-war semis in its cities, with plenty of villages and new estates in between. Victorian and Edwardian homes in Bourne often have brick piers that look solid but have shallow foundations, so installers may add steel posts behind them to carry motor loads.
On country lanes around Bourne, installers often set the gates back from the road so vehicles can pull fully off the lane while the gates open. Farm drives near Bourne can carry tractors and delivery lorries, so posts, hinges and motors need to be sized for heavier, wider gates.
Electric Gate Installation services in Bourne
Sliding Gate Installation
Track or cantilever sliding gates for sloping drives, short driveways and entrances where there is no space for leaves to swing.
Swing Gate Installation
Single or double swing gates on new or existing posts, with ram or underground motors sized to the gate weight, width and how exposed it is to wind.
Electric Gate Servicing and Repairs
Planned maintenance, fault finding and repairs for automated gates, including failed motors, burnt boards, broken hinges and misbehaving photocells.
Electric Gate Safety Upgrades
Bringing older automated gates up to current safety expectations with force testing, safety edges, extra photocells and a proper risk assessment.
Access Control and Intercoms
Keypads, video intercoms, GSM and app control, ANPR cameras and exit loops so you decide who gets in and how.
Gate Automation Retrofit
Adding motors, a control board and safety devices to gates you already have, after checking the gates and posts are strong enough.
Electric Gate Installation prices in Bourne
- Automation kit fitted to existing double swing gates: £1,800–£3,200. Ram motors, control board, photocells, warning light and two fobs, assuming the gates and posts are sound.
- Steel double swing gates with automation: £4,500–£8,500. Made-to-measure metal gates up to about 4m wide, new steel posts, motors and basic safety kit.
- Hardwood double swing gates with automation: £6,000–£11,000. Iroko or oak gates on steel frames, which add weight and need stronger motors and posts.
Prices are a guide. Your quote for Bourne is a fixed price based on the details you give us. Full price guide.
Electric Gate Installation questions from Bourne
How much do electric gates cost in Bourne?
Most homeowners in Bourne pay between £4,500 and £11,000 for new automated gates fitted, depending on size, material and groundworks. Automating sound existing gates usually costs £1,800 to £3,200. A local installer will give you a fixed price after a site survey.
Will electric gates in Bourne cope with winter weather?
Good-quality motors are rated for sub-zero temperatures. Installers serving Bourne also make sure underground motor boxes drain properly and tracks are kept clear, as ice and standing water cause most winter faults.
Can my installer in Bourne add an intercom to my gates?
Yes. Installers in Bourne fit keypads, video intercoms, GSM units and app control. It is cheaper to add these during installation, because cables can share the same ducting as the motor wiring.
Are solar-powered electric gates an option near Bourne?
For rural entrances around Bourne far from mains power, solar kits with battery storage work well for gates used a modest number of times a day. Busy entrances still benefit from a mains supply.
What happens to electric gates in a power cut?
Every compliant electric gate has a manual release, usually a key-operated lever on the motor, so you can open it by hand. Many systems can also be fitted with battery backup that keeps the gates working for a set number of cycles during an outage. Your installer should show you how to use the release at handover.
How long does it take to install electric gates?
On site, most domestic installations take two to four days, including time for concrete to cure. Before that, made-to-measure gates typically take three to six weeks to manufacture. Retrofitting motors to existing gates can often be done in one or two days if the posts and hinges are in good condition.
Helpful guides
How to Choose an Electric Gate Installer: Checks Before You Book
Choose an electric gate installer who carries out a site risk assessment, fits safety devices in line with BS EN 12453, force-tests the…
Read the guide →Electric Gate Safety Rules in the UK: What Homeowners Must Know
In the UK, powered gates are treated as machinery. A new installation should follow the Supply of Machinery (Safety) Regulations 2008, with…
Read the guide →Get a free electric gate installation quote in Bourne
Tell us what you need and we'll come back with a clear price.
Request a quote