East Sussex · South East
Electric Gate Installation in Bexhill-on-Sea
Whether you are replacing tired timber gates or starting from an open drive in Bexhill-on-Sea, our installers serving East Sussex handle the groundworks, motors and access control in one job.
Request a free site survey for electric gates in Bexhill-on-Sea.
Where we work around Bexhill-on-Sea
We cover all of Bexhill-on-Sea and the wider East Sussex area. Jobs here are mostly in the TN39 and TN40 postcode areas. The same team covers Ninfield too.
Electric Gate Installation in Bexhill-on-Sea: local know-how
Suburban drives in Bexhill-on-Sea usually suit double swing gates with ram motors, giving a secure frontage without the cost of heavy groundworks. Where Bexhill-on-Sea homes have block-paved drives, installers lift and relay paviors carefully to bury ducting and footings without leaving obvious patches.
Clay soils across much of the South East move with the seasons, which affects anything built into the ground, from walls and bases to drainage. Period properties in Bexhill-on-Sea often suit traditional timber or wrought-iron style gates, which can be automated with discreet underground motors. Salt air near the coast at Bexhill-on-Sea attacks bare steel, so installers recommend galvanised and powder-coated gates and stainless fixings.
What we can do in Bexhill-on-Sea
Swing Gate Installation
Single or double swing gates on new or existing posts, with ram or underground motors sized to the gate weight, width and how exposed it is to wind.
Sliding Gate Installation
Track or cantilever sliding gates for sloping drives, short driveways and entrances where there is no space for leaves to swing.
Gate Automation Retrofit
Adding motors, a control board and safety devices to gates you already have, after checking the gates and posts are strong enough.
Access Control and Intercoms
Keypads, video intercoms, GSM and app control, ANPR cameras and exit loops so you decide who gets in and how.
Electric Gate Safety Upgrades
Bringing older automated gates up to current safety expectations with force testing, safety edges, extra photocells and a proper risk assessment.
Electric Gate Servicing and Repairs
Planned maintenance, fault finding and repairs for automated gates, including failed motors, burnt boards, broken hinges and misbehaving photocells.
Typical costs in Bexhill-on-Sea
- Underground motors instead of rams: from £1,200. Extra cost per pair for foundation boxes, drainage and the motors themselves.
- Sliding gate with track or cantilever system: £6,500–£13,000. Includes concrete base or track, rack and motor; cantilever designs sit at the upper end.
- Hardwood double swing gates with automation: £6,000–£11,000. Iroko or oak gates on steel frames, which add weight and need stronger motors and posts.
Prices are a guide. Your quote for Bexhill-on-Sea is a fixed price based on the details you give us. Full price guide.
Electric Gate Installation questions from Bexhill-on-Sea
Can I get a sliding gate on a short drive in Bexhill-on-Sea?
Yes, as long as there is a clear run beside the entrance roughly as long as the gate. Sliding gates are popular on short Bexhill-on-Sea drives because they keep the space behind the gate free for parking.
Will electric gates in Bexhill-on-Sea cope with winter weather?
Good-quality motors are rated for sub-zero temperatures. Installers serving Bexhill-on-Sea also make sure underground motor boxes drain properly and tracks are kept clear, as ice and standing water cause most winter faults.
How soon can electric gates be fitted in Bexhill-on-Sea?
Surveys in Bexhill-on-Sea can usually be booked within a week or two. Made-to-measure gates take around three to six weeks to manufacture, then two to four days to install. Automation retrofits on existing gates can often be fitted sooner.
What gates suit a sloping drive in Bexhill-on-Sea?
Many drives in Bexhill-on-Sea slope towards the house or the road. Sliding gates are often the best answer because they run along the boundary. Swing gates can work with rising hinges or by lowering part of the drive under the leaves.
Can electric gates open outwards onto the pavement?
No. Gates must not open outwards over a public road or footpath. If your drive is too short or steep for gates to open inwards, a sliding gate is the usual answer. An installer will check this at the survey and design the gate to open within your boundary.
Do electric gates need a separate power supply?
Most mains-powered gates need a dedicated fused spur run in armoured cable from your consumer unit to the control box. This part should be done by a qualified electrician. Low-voltage motor and safety wiring then runs in ducting. Solar-powered kits are available for remote gates without mains power nearby.
Helpful guides
Electric Gate Safety Rules in the UK: What Homeowners Must Know
In the UK, powered gates are treated as machinery. A new installation should follow the Supply of Machinery (Safety) Regulations 2008, with…
Read the guide →How Much Do Electric Gates Cost in the UK? (2026 Guide)
In the UK in 2026, automating existing double swing gates typically costs £1,800–£3,200. Steel double swing gates with automation cost…
Read the guide →Get a free electric gate installation quote in Bexhill-on-Sea
Tell us what you need and we'll come back with a clear price.
Request a quote