Barnet · London
Electric Gate Installation in Barnet
We arrange electric gate installation in Barnet, Potters Bar and Borehamwood, covering new gates, automation retrofits, intercoms and safety upgrades.
Secure your Barnet home with professionally fitted electric gates.
Our Barnet coverage
We cover all of Barnet and the wider Barnet area. That includes the EN5, EN4, N20, N11, NW7 and HA8 postcode districts. The same team covers Finchley, Edgware, Friern Barnet and Enfield too.
Local considerations in Barnet
Many semi-detached homes in Barnet have a side drive with a slope towards the house, which installers check closely before recommending swing or sliding gates. Families in the quieter streets of Barnet often add electric gates to keep children and dogs safely inside the front garden.
Basements, mansard conversions and shared freeholds are common across London, so jobs often involve neighbours, managing agents or freeholders. Victorian and Edwardian homes in Barnet often have brick piers that look solid but have shallow foundations, so installers may add steel posts behind them to carry motor loads.
Electric Gate Installation jobs we handle in Barnet
Swing Gate Installation
Single or double swing gates on new or existing posts, with ram or underground motors sized to the gate weight, width and how exposed it is to wind.
Electric Gate Servicing and Repairs
Planned maintenance, fault finding and repairs for automated gates, including failed motors, burnt boards, broken hinges and misbehaving photocells.
Electric Gate Safety Upgrades
Bringing older automated gates up to current safety expectations with force testing, safety edges, extra photocells and a proper risk assessment.
Access Control and Intercoms
Keypads, video intercoms, GSM and app control, ANPR cameras and exit loops so you decide who gets in and how.
Gate Automation Retrofit
Adding motors, a control board and safety devices to gates you already have, after checking the gates and posts are strong enough.
Sliding Gate Installation
Track or cantilever sliding gates for sloping drives, short driveways and entrances where there is no space for leaves to swing.
How much it costs in Barnet
- Underground motors instead of rams: from £1,200. Extra cost per pair for foundation boxes, drainage and the motors themselves.
- Sliding gate with track or cantilever system: £6,500–£13,000. Includes concrete base or track, rack and motor; cantilever designs sit at the upper end.
- Hardwood double swing gates with automation: £6,000–£11,000. Iroko or oak gates on steel frames, which add weight and need stronger motors and posts.
Prices are a guide. Your quote for Barnet is a fixed price based on the details you give us. Full price guide.
Electric Gate Installation questions from Barnet
Will electric gates in Barnet cope with winter weather?
Good-quality motors are rated for sub-zero temperatures. Installers serving Barnet also make sure underground motor boxes drain properly and tracks are kept clear, as ice and standing water cause most winter faults.
Can my installer in Barnet add an intercom to my gates?
Yes. Installers in Barnet fit keypads, video intercoms, GSM units and app control. It is cheaper to add these during installation, because cables can share the same ducting as the motor wiring.
Are solar-powered electric gates an option near Barnet?
For rural entrances around Barnet far from mains power, solar kits with battery storage work well for gates used a modest number of times a day. Busy entrances still benefit from a mains supply.
Can I get a sliding gate on a short drive in Barnet?
Yes, as long as there is a clear run beside the entrance roughly as long as the gate. Sliding gates are popular on short Barnet drives because they keep the space behind the gate free for parking.
How long does it take to install electric gates?
On site, most domestic installations take two to four days, including time for concrete to cure. Before that, made-to-measure gates typically take three to six weeks to manufacture. Retrofitting motors to existing gates can often be done in one or two days if the posts and hinges are in good condition.
Do electric gates need a separate power supply?
Most mains-powered gates need a dedicated fused spur run in armoured cable from your consumer unit to the control box. This part should be done by a qualified electrician. Low-voltage motor and safety wiring then runs in ducting. Solar-powered kits are available for remote gates without mains power nearby.
Helpful guides
Can You Automate Existing Gates? A Practical Guide
Yes, most existing gates can be automated if they are structurally sound, hang square and swing freely by hand, and the posts can carry the…
Read the guide →Sliding vs Swing Electric Gates: Which Is Right for Your Drive?
Choose swing gates if you have a level drive, enough space behind the gates for them to open, and want the lower cost. Choose a sliding…
Read the guide →Get a free electric gate installation quote in Barnet
Tell us what you need and we'll come back with a clear price.
Request a quote