Somerset · South West
Electric Gate Installation in Chard
Whether you are replacing tired timber gates or starting from an open drive in Chard, our installers serving Somerset handle the groundworks, motors and access control in one job.
Chard and the surrounding area
Chard falls within Somerset, South West. That includes the TA20 postcode districts. Nearby places we also cover include Ilminster and Tatworth.
Working in Chard
On country lanes around Chard, installers often set the gates back from the road so vehicles can pull fully off the lane while the gates open. Farm drives near Chard can carry tractors and delivery lorries, so posts, hinges and motors need to be sized for heavier, wider gates.
Local stone, cob and lime-rendered buildings are common in parts of the South West, so materials need to suit older, breathable construction. Victorian and Edwardian homes in Chard often have brick piers that look solid but have shallow foundations, so installers may add steel posts behind them to carry motor loads.
Our services in Chard
Gate Automation Retrofit
Adding motors, a control board and safety devices to gates you already have, after checking the gates and posts are strong enough.
Sliding Gate Installation
Track or cantilever sliding gates for sloping drives, short driveways and entrances where there is no space for leaves to swing.
Swing Gate Installation
Single or double swing gates on new or existing posts, with ram or underground motors sized to the gate weight, width and how exposed it is to wind.
Electric Gate Servicing and Repairs
Planned maintenance, fault finding and repairs for automated gates, including failed motors, burnt boards, broken hinges and misbehaving photocells.
Electric Gate Safety Upgrades
Bringing older automated gates up to current safety expectations with force testing, safety edges, extra photocells and a proper risk assessment.
Access Control and Intercoms
Keypads, video intercoms, GSM and app control, ANPR cameras and exit loops so you decide who gets in and how.
Guide prices for Chard
- Steel double swing gates with automation: £4,500–£8,500. Made-to-measure metal gates up to about 4m wide, new steel posts, motors and basic safety kit.
- Automation kit fitted to existing double swing gates: £1,800–£3,200. Ram motors, control board, photocells, warning light and two fobs, assuming the gates and posts are sound.
- Video intercom or GSM access control: £450–£1,500. Wired or app-based video intercoms and GSM units, including cabling to the house.
Prices are a guide. Your quote for Chard is a fixed price based on the details you give us. Full price guide.
Electric Gate Installation questions from Chard
Can my installer in Chard add an intercom to my gates?
Yes. Installers in Chard fit keypads, video intercoms, GSM units and app control. It is cheaper to add these during installation, because cables can share the same ducting as the motor wiring.
Are solar-powered electric gates an option near Chard?
For rural entrances around Chard far from mains power, solar kits with battery storage work well for gates used a modest number of times a day. Busy entrances still benefit from a mains supply.
Can I get a sliding gate on a short drive in Chard?
Yes, as long as there is a clear run beside the entrance roughly as long as the gate. Sliding gates are popular on short Chard drives because they keep the space behind the gate free for parking.
What gates suit a sloping drive in Chard?
Many drives in Chard slope towards the house or the road. Sliding gates are often the best answer because they run along the boundary. Swing gates can work with rising hinges or by lowering part of the drive under the leaves.
Swing or sliding gates: which is better?
It depends on your drive. Swing gates are cheaper and suit level drives with space for the leaves to open inwards. Sliding gates suit sloping drives, short driveways and openings where a parked car would block a swinging leaf. Sliding gates need a clear run beside the entrance at least as long as the gate.
Do I need planning permission for electric gates?
Often not. In England, gates up to 1 metre high next to a road used by vehicles, or 2 metres elsewhere, are usually permitted development. You will need permission for taller gates, for listed buildings and often in conservation areas. Creating a new vehicle access onto a classified road also needs consent. Check with your council if you are unsure.
Helpful guides
Sliding vs Swing Electric Gates: Which Is Right for Your Drive?
Choose swing gates if you have a level drive, enough space behind the gates for them to open, and want the lower cost. Choose a sliding…
Read the guide →Electric Gate Safety Rules in the UK: What Homeowners Must Know
In the UK, powered gates are treated as machinery. A new installation should follow the Supply of Machinery (Safety) Regulations 2008, with…
Read the guide →Get a free electric gate installation quote in Chard
Tell us what you need and we'll come back with a clear price.
Request a quote